Techmer ES PlaslubeÂ® J-1/30/TF/10 Nylon 66, 30% GFR, 10% PTFE

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass Fiber/PTFE Filled
Manufacturer	Techmer ES
Trade Name	Plaslube®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Techmer ES PlaslubeÂ® J-1/30/TF/10 Nylon 66, 30% GFR, 10% PTFE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Plaslube glass fiber reinforced, polytetrafluoroethylene (PTFE) lubricated nylon 66 grades offer an excellent balance of wear and friction performance and mechanical strength. The addition of silicone to these products enhances the wear and friction performance of these grades. Typical applications include pulleys, wear slides, cams, gears and high strength bearings.

Physical Properties	Metric	English	Comments
Density	1.45 g/cc	0.0524 lb/inÂ³	ASTM D792
Water Absorption	0.70 %	0.70 %	24 hrs. ASTM D570
Linear Mold Shrinkage	0.0020 cm/cm @Thickness 3.17 mm	0.0020 in/in @Thickness 0.125 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	169 MPa	24500 psi	ASTM D638
Flexural Yield Strength	245 MPa	35500 psi	ASTM D790
Flexural Modulus	8.62 GPa	1250 ksi	ASTM D790
Izod Impact, Notched	1.17 J/cm @Thickness 3.17 mm	2.20 ft-lb/in @Thickness 0.125 in	ASTM D256
Coefficient of Friction, Dynamic	0.27	0.27
Coefficient of Friction, Static	0.22	0.22
K (wear) Factor	50.4 x 10^-8 mmÂ³/N-M	25.0 x 10^-10 inÂ³-min/ft-lb-hr	Thrust washer at 2000 PV

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	257 Â°C	495 Â°F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	251 Â°C	484 Â°F	ASTM D648

Users viewing this material also viewed the following: