- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Techmer ES HiFill® PA6 0388
Techmer ES HiFill® PA6 0388
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PA6 0388.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: High Specific GravityInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.88 g/cc | 0.140 lb/in³ | ASTM D792 |
| Water Absorption | 0.10 % @Time 86400 sec |
0.10 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0020 cm/cm @Thickness 3.17 mm |
0.0020 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 44.8 MPa | 6500 psi | ASTM D638 |
| Elongation at Break | 1.0 % | 1.0 % | ASTM D638 |
| Flexural Strength | 48.3 MPa | 7000 psi | ASTM D790 |
| Flexural Modulus | 6.89 GPa | 1000 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm @Thickness 3.17 mm |
0.700 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 174 °C | 345 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 167 °C | 333 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.0 - 100 ohm-cm | 1.0 - 100 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- Nye Lubricants 740S (RL) Synthetic Oil
- Nye Lubricants 783D (NG) Synthetic Oil
- Resinlab® EP750 Clear Unfilled Epoxy Structural Adhesive
- Malvern Minerals Thermoplastic Polyester with Novakup® 1250 Silane-Treated Quartz Filler
- MarkeTech Silicon Single Crystal Semiconductor Wafer, n-type, Phosphorous Doped, Czochralski-LED Grown
- A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer
- Addiplast Addinyl A2 V40 Nylon 66, 40% Glass Filled
- Abatron AboCast 53-15/AboCure 53-15 Adhesive/Casting
Copyright © lookpolymers.com All Rights Reserved