- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Techmer ES HiFill® PA6 0180 B Barium Sulfate Filler
Techmer ES HiFill® PA6 0180 B Barium Sulfate Filler
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PA6 0180 B Barium Sulfate Filler.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFiller/Reinforcement: Barium SulfateFeatures: High Specific GravityInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D792 |
| Water Absorption | 0.10 % @Time 86400 sec |
0.10 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0030 cm/cm @Thickness 3.17 mm |
0.0030 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 47.6 MPa | 6900 psi | ASTM D638 |
| Elongation at Break | 1.0 % | 1.0 % | ASTM D638 |
| Flexural Strength | 50.3 MPa | 7300 psi | ASTM D790 |
| Flexural Modulus | 5.52 GPa | 800 ksi | ASTM D790 |
| Izod Impact, Notched | 0.481 J/cm @Thickness 3.17 mm |
0.900 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 174 °C | 345 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 167 °C | 333 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 - 1.00e+14 ohm-cm | 1.00e+13 - 1.00e+14 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- PolyMirae Moplen EP300K Injection Molding Grade Polypropylene
- Victrex® ST™ ST45CA30 PolyEtherKetoneEtherKetoneKetone, 30% Carbon Fibre Reinforced
- Huntsman Araldite GY 9615 Bisphenol A Epoxy Liquid Resin
- Washington Penn PPH2TF-2B Polypropylene, 20% Talc Filled
- Barlog Plastics KEBAFLOW HF140 LCP, 40% glass fiber reinforced
- Arkema Group Rilsan® BUM 30 Nylon 11, 30% Glass Bead Filled (Conditioned)
- 3M Scotchcal™ 1000-14 Graphic Film
- A. Schulman POLYBATCH™ Orange 1046E Concentrate Based In Polyethylene
- Solvay Specialty Polymers Veradel® 3320GF Polyethersulfone (PESU) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved