- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Unreinforced, Flame Retardant
- Techmer ES HiFill FR® PA6 FR IM 004
Techmer ES HiFill FR® PA6 FR IM 004
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Impact Grade , Nylon 6, Unreinforced, Flame Retardant |
| Manufacturer | Techmer ES |
| Trade Name | HiFill FR® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill FR® PA6 FR IM 004.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsAdditive: Impact ModifierFeatures: Flame Retardant and Impact ModifiedInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.28 g/cc | 0.0462 lb/in³ | ASTM D792 |
| Water Absorption | 0.060 % @Time 86400 sec |
0.060 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.015 cm/cm @Thickness 3.17 mm |
0.015 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 97 | 97 | ASTM D785 |
| Tensile Strength, Yield | 39.3 MPa | 5700 psi | ASTM D638 |
| Elongation at Break | 60 % | 60 % | ASTM D638 |
| Flexural Strength | 56.5 MPa | 8200 psi | ASTM D790 |
| Flexural Modulus | 1.72 GPa | 250 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm @Thickness 3.17 mm |
3.00 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 59.4 µm/m-°C | 33.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 62.8 °C | 145 °F | Unannealed; ASTM D648 |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | ASTM D257 |
| Dielectric Strength | 20.9 kV/mm | 530 kV/in | Method A (Short-Time); ASTM D149 |
Users viewing this material also viewed the following:
- S&E Specialty Polymers GM-3950-095 PVC
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 60 PHR Polyfil HG90 Filler
- Kuraray HYBRAR® PP3 Thermoplastic Rubber-Polypropylene Blend
- SABIC Innovative Plastics ULTEM 1285 PEI (Europe-Africa-Middle East)
- SABIC Innovative Plastics LNP THERMOTUF RF006I PA 66
- Chevron Phillips Marlex® EHM 6007 High Density Polyethylene
- Elgiloy® Co-Cr-Ni Alloy, Wire, 20% Cold Reduction
- COI Ceramics Sylramic™ S300 Silicon Carbide Ceramic Matrix Composite, SiC
- BASF Pluracol® SG-470 Rigid Polyol
Copyright © lookpolymers.com All Rights Reserved