TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 30 PHR N774 (SRF) Filler

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 30 PHR N774 (SRF) Filler.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear strength, oil and fuel resistance, and ozone resistance. The life expectancy of urethane is often 5 times longer than other elastomers, thus saving material costs and downtime expense. One shortcoming of polyurethanes is loss of physical properties at temperatures over 180°F (82°C). MILLATHANE HT has overcome this weakness.FormulationMillathane HT100.0Zinc Stearate0.5MBTS4.0MBT2.0THANECURE® ZM1.0Sulfur1.5N774 (SRF)30All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	64	64
Tensile Strength, Yield	20.02 MPa	2903 psi
Elongation at Yield	398 %	398 %
100% Modulus	0.00382 GPa	0.554 ksi
200% Modulus	0.009611 GPa	1.394 ksi
300% Modulus	0.01509 GPa	2.188 ksi
Tear Strength	47.4 kN/m	270 pli	Die C
Taber Abrasion, mg/1000 Cycles	0.090	0.090	H-18, mg loss/rev
Compression Set	63 % @Temperature 70.0 °C, Time 79200 sec	63 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	20.0 min @Temperature 149 °C	0.333 hour @Temperature 300 °F

Users viewing this material also viewed the following: