- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate/ABS Alloy, Unreinforced
- Styron Pulse® 600 ABS + Polycarbonate
Styron Pulse® 600 ABS + Polycarbonate
| Category | Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Unreinforced , Polycarbonate (PC) |
| Manufacturer | Styron |
| Trade Name | Pulse® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styron Pulse® 600 ABS + Polycarbonate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PULSE® 600 Engineering resin is designed to offer a superior balance of properties between impact strength, heat resistance and processability. It offers excellent processability, medium heat resistance, and high impact strength at both room and low temperatures.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | ASTM Data |
| Water Absorption | 0.15 % | 0.15 % | |
| Moisture Absorption at Equilibrium | 0.32 % | 0.32 % | Humidity Absorption |
| Linear Mold Shrinkage | 0.0070 cm/cm | 0.0070 in/in | |
| Melt Flow | 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C |
5.0 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM Data |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | |
| Tensile Strength, Ultimate | 44.8 MPa | 6500 psi | ASTM Data |
| Tensile Strength, Yield | 51.0 MPa | 7400 psi | ASTM Data |
| Elongation at Break | 100 % | 100 % | ASTM Data |
| Elongation at Yield | 4.1 % | 4.1 % | ISO Data |
| Tensile Modulus | 2.30 GPa | 334 ksi | ISO Data. |
| Izod Impact, Notched | 3.74 J/cm | 7.01 ft-lb/in | ASTM Data |
| 2.14 J/cm @Temperature -50.0 °C |
4.01 ft-lb/in @Temperature -58.0 °F |
ASTM Data | |
| Charpy Impact Unnotched | NB | NB | ISO Data |
| NB | NB | ISO Data, Low Temp | |
| Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | ISO Data, Low Temp |
| 6.50 J/cm² | 30.9 ft-lb/in² | ISO Data | |
| Impact Test | 56.5 J @Temperature 23.0 °C |
41.7 ft-lb @Temperature 73.4 °F |
Instrumented Dart Total Energy |
| 62.2 J @Temperature -30.0 °C |
45.9 ft-lb @Temperature -22.0 °F |
Instrumented Dart Total Energy |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 73.8 µm/m-°C @Temperature 20.0 °C |
41.0 µin/in-°F @Temperature 68.0 °F |
ASTM data |
| Deflection Temperature at 1.8 MPa (264 psi) | 98.9 °C | 210 °F | Unannealed; 113°C (235°F) annealed; ASTM Data |
Users viewing this material also viewed the following:
- MV Labs SE800 SeO2 Selenium(IV) oxide
- Fine Organics FINALUX CB 50 Composite Lubricant
- Ineos ABS Triax® 3050 ABS/Nylon Alloy, Injection Molding Grade (Conditioned)
- DayGlo ZQ Pigments ZQ-13 Rocket Red
- Eurostar Staramide AG8 PA66, 40% Glass Fiber Reinforced, Injection Molding
- Dow Nordel® NDR 3722P EPDM Hydrocarbon Rubber
- Carmel Olefins IPETHENE® 320 Low Density Polyethylene
- BASF E-por® 0.025 g/cc Density; Styrene and Ethylene (Europe)
- ExxonMobil Mobil Pegasus 610 40
- Arkema Group Orgalloy® P 60AD Nylon (Conditioned)
Copyright © lookpolymers.com All Rights Reserved