- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals NIMONIC® Alloy PK33
Special Metals NIMONIC® Alloy PK33
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | NIMONIC® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals NIMONIC® Alloy PK33.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-chromium-cobalt alloy that is precipitation hardenable and also contains a relatively high (7%) level of molybdenum for solid-solution strengthening. It has an exceptional combination of high-temperature strength, creep resistance, and ductility when welded. The alloy is especially suitable for welded sheet structures. Used in gas turbines for flame tubes and other components. Standard product forms are round, extruded section, sheet, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.21 g/cc | 0.297 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 1020 MPa @Temperature 650 °C |
148000 psi @Temperature 1200 °F |
Precipitation Hardened prior to test |
| 1150 MPa @Temperature 23.0 °C |
167000 psi @Temperature 73.4 °F |
||
| Tensile Strength, Yield | 750 MPa @Strain 0.200 % |
109000 psi @Strain 0.200 % |
Precipitation Hardened. Value at room temperature |
| 720 MPa @Strain 0.200 %, Temperature 650 °C |
104000 psi @Strain 0.200 %, Temperature 1200 °F |
Precipitation Hardened prior to test | |
| Elongation at Break | 30 % | 30 % | Precipitation Hardened |
| 30 % @Temperature 650 °C |
30 % @Temperature 1200 °F |
Precipitation Hardened prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 12.1 µm/m-°C @Temperature 20.0 - 100 °C |
6.72 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.419 J/g-°C | 0.100 BTU/lb-°F | |
| Thermal Conductivity | 11.3 W/m-K | 78.4 BTU-in/hr-ft²-°F | |
| Melting Point | 1300 - 1345 °C | 2370 - 2453 °F | |
| Solidus | 1300 °C | 2370 °F | |
| Liquidus | 1345 °C | 2453 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 1.7 - 2.5 % | 1.7 - 2.5 % | |
| Boron, B | <= 0.0050 % | <= 0.0050 % | |
| Carbon, C | <= 0.070 % | <= 0.070 % | |
| Chromium, Cr | 16 - 20 % | 16 - 20 % | |
| Cobalt, Co | 12 - 16 % | 12 - 16 % | |
| Copper, Cu | <= 0.20 % | <= 0.20 % | |
| Iron, Fe | <= 1.0 % | <= 1.0 % | |
| Manganese, Mn | <= 0.50 % | <= 0.50 % | |
| Molybdenum, Mo | 5.0 - 9.0 % | 5.0 - 9.0 % | |
| Nickel, Ni | 54 % | 54 % | As remainder |
| Silicon, Si | <= 0.50 % | <= 0.50 % | |
| Sulfur, S | <= 0.015 % | <= 0.015 % | |
| Titanium, Ti | 1.5 - 3.0 % | 1.5 - 3.0 % | |
| Zirconium, Zr | <= 0.060 % | <= 0.060 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000126 ohm-cm | 0.000126 ohm-cm | |
| Magnetic Permeability | 1.0005 | 1.0005 | at 200 oersted (15.9 kA/m) |
Users viewing this material also viewed the following:
- Mitsui APELâ„¢ APL6011T Cyclo Olefin Copolymer (COC)
- Lehmann & Voss LUVOTECH® GS 58 Polyamide 66, with glass fiber, lubricant modified
- Gromax CCP PBT 1100-600S
- Momentive Performance Materials Addisilâ„¢ 1160 M Industrial Molding Heat Cured Rubber
- Solvay Specialty Polymers Tecnoflon® PL 958 Fluoroelastomer
- SABIC Innovative Plastics LNP THERMOCOMP HX03409C PA11
- Colorite Polymers 5790 General Purpose Vinyl Compound
- Eastman Tenite Butyrate 465E2R30008 Natural, Trsp Cellulose Acetate Butyrate (discontinued **)
- Sinotek Materials W80-Z Amorphous Graphite Grain
Copyright © lookpolymers.com All Rights Reserved