- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals INCONEL® Alloy 625
Special Metals INCONEL® Alloy 625
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCONEL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCONEL® Alloy 625.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Niobium content includes tantalum. A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors. Standard product forms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.44 g/cc | 0.305 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 880 MPa | 128000 psi | Annealed |
| 760 MPa @Temperature 650 °C |
110000 psi @Temperature 1200 °F |
Annealed prior to test | |
| Tensile Strength, Yield | 460 MPa | 66700 psi | Annealed |
| 290 MPa @Temperature 650 °C |
42100 psi @Temperature 1200 °F |
Annealed prior to test | |
| Elongation at Break | 50 % | 50 % | Annealed prior to test. |
| 55 % @Temperature 650 °C |
55 % @Temperature 1200 °F |
Annealed prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 12.8 µm/m-°C @Temperature 20.0 - 100 °C |
7.11 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.410 J/g-°C | 0.0980 BTU/lb-°F | |
| Thermal Conductivity | 9.80 W/m-K | 68.0 BTU-in/hr-ft²-°F | |
| Melting Point | 1290 - 1350 °C | 2350 - 2460 °F | |
| Solidus | 1290 °C | 2350 °F | |
| Liquidus | 1350 °C | 2460 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | <= 0.40 % | <= 0.40 % | |
| Carbon, C | <= 0.10 % | <= 0.10 % | |
| Chromium, Cr | 20 - 23 % | 20 - 23 % | |
| Cobalt, Co | <= 1.0 % | <= 1.0 % | |
| Iron, Fe | <= 5.0 % | <= 5.0 % | |
| Manganese, Mn | <= 0.50 % | <= 0.50 % | |
| Molybdenum, Mo | 8.0 - 10 % | 8.0 - 10 % | |
| Nickel, Ni | >= 58 % | >= 58 % | |
| Niobium, Nb (Columbium, Cb) | 3.15 - 4.15 % | 3.15 - 4.15 % | Includes Ta |
| Phosphorous, P | <= 0.015 % | <= 0.015 % | |
| Silicon, Si | <= 0.50 % | <= 0.50 % | |
| Sulfur, S | <= 0.015 % | <= 0.015 % | |
| Titanium, Ti | <= 0.40 % | <= 0.40 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000129 ohm-cm | 0.000129 ohm-cm | |
| Magnetic Permeability | 1.0006 | 1.0006 | at 200 oersted (15.9 kA/m) |
| Curie Temperature | <= -196 °C | <= -321 °F |
Users viewing this material also viewed the following:
- Loxim 330 01HSL Nylon 6
- Solvay Specialty Polymers Polymist® XPP 548 Polytetrafluoroethylene (PTFE)
- SMAC CABLE® 2518S-20-08 Damping Material
- SABIC Innovative Plastics LNP THERMOCOMP UC008H PPA
- A. Schulman INVISION™ VX-5085UI Soft Touch Polyolefin Thermoplastic
- Formosa Plastics Formolene® HB5502F Blow Molding HDPE
- Trimay® Wear Plate T156 Iron-based Steel Overlay
- A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene
Copyright © lookpolymers.com All Rights Reserved