Special Metals INCONELÂ® 706 Precipitation Hardening Alloy, Hot Finished Rod, 3 Part Heat Treatment, 8.0 inch (203 mm) Diameter

Category	Metal , Nonferrous Metal , Nickel Alloy , Superalloy , Iron Base
Manufacturer	Special Metals (includes the former Inco Alloys International Inc.)
Trade Name	INCONEL®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Special Metals INCONELÂ® 706 Precipitation Hardening Alloy, Hot Finished Rod, 3 Part Heat Treatment, 8.0 inch (203 mm) Diameter.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Tensile strength (ultimate and yield), compressive strength, reduction of area, and elongation values reported here are typical for Hot Finished Rod, 3 Part Heat Treatment, 8.0 inch (203 mm) Diameter samples. Density and magnetic permeability are typical of precipitation hardened INCONELÂ® alloy 706. Other property values are typical of INCONELÂ® alloy 706.For optimum creep and rupture properties, the alloy receives a three part heat treatment as follows: Solution treat 1700-1850Â°F (925-1010Â°C) for a time commensurate with section size, then air cool. Stabilizing treatment 1550Â°F (845Â°C)/3 hr, air cool. Precipitation treatment 1325Â°F (720Â°C)/8 hr, furnace cool at 100Â°F (55Â°C)/hr to 1150Â°F (620Â°C)/8 hr, air cool.Data provided by the manufacturer, Special Metals.

Physical Properties	Metric	English	Comments
Density	8.08 g/cc	0.292 lb/inÂ³	Precipitation Hardened

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	1300 MPa	189000 psi
Tensile Strength, Yield	1010 MPa @Strain 0.200 %	146000 psi @Strain 0.200 %
Elongation at Break	18 %	18 %
Reduction of Area	28 %	28 %
Modulus of Elasticity	210 GPa	30500 ksi	Dynamic Method
Compressive Yield Strength	1102 MPa	159900 psi	(0.2% Offset) Thickness not reported for this value
Poissons Ratio	0.382	0.382	Calculated by mfr.
Shear Modulus	76.0 GPa	11000 ksi	Dynamic Method

Thermal Properties	Metric	English	Comments
CTE, linear	13.46 Âµm/m-Â°C @Temperature 24.0 - 100 Â°C	7.478 Âµin/in-Â°F @Temperature 75.2 - 212 Â°F	Mean
	15.08 Âµm/m-Â°C @Temperature 24.0 - 300 Â°C	8.378 Âµin/in-Â°F @Temperature 75.2 - 572 Â°F	Mean
	15.59 Âµm/m-Â°C @Temperature 24.0 - 500 Â°C	8.661 Âµin/in-Â°F @Temperature 75.2 - 932 Â°F	Mean
	16.42 Âµm/m-Â°C @Temperature 21.0 - 700 Â°C	9.122 Âµin/in-Â°F @Temperature 69.8 - 1290 Â°F	Mean
Specific Heat Capacity	0.444 J/g-Â°C	0.106 BTU/lb-Â°F
Thermal Conductivity	12.5 W/m-K	86.8 BTU-in/hr-ftÂ²-Â°F
Melting Point	1334 - 1371 Â°C	2433 - 2500 Â°F
Solidus	1334 Â°C	2433 Â°F
Liquidus	1371 Â°C	2500 Â°F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	<= 0.060 %	<= 0.060 %
Boron, B	<= 0.0060 %	<= 0.0060 %
Carbon, C	<= 0.30 %	<= 0.30 %
Chromium, Cr	14.5 - 17.5 %	14.5 - 17.5 %
Cobalt, Co	<= 1.0 %	<= 1.0 %
Copper, Cu	<= 0.35 %	<= 0.35 %
Iron, Fe	38 %	38 %	As remainder
Manganese, Mn	<= 0.35 %	<= 0.35 %
Nickel, Ni	39 - 44 %	39 - 44 %	Including Cobalt
Niobium, Nb (Columbium, Cb)	2.5 - 3.3 %	2.5 - 3.3 %	Includes Ta
Phosphorous, P	<= 0.020 %	<= 0.020 %
Silicon, Si	<= 0.35 %	<= 0.35 %
Sulfur, S	<= 0.015 %	<= 0.015 %
Titanium, Ti	<= 0.40 %	<= 0.40 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000985 ohm-cm	0.0000985 ohm-cm
Magnetic Permeability	1.01	1.01	at 200 Oersted (15.9 kA/m);Annealed
Curie Temperature	<= -78.0 Â°C	<= -108 Â°F

Users viewing this material also viewed the following: