- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Solvay TECHNYL® A 218G1 V25 Black 34N PA66, 25% glass fiber, Conditioned
Solvay TECHNYL® A 218G1 V25 Black 34N PA66, 25% glass fiber, Conditioned
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Solvay |
| Trade Name | Technyl® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay TECHNYL® A 218G1 V25 Black 34N PA66, 25% glass fiber, Conditioned.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Polyamide 66, reinforced with 25% of glass fiber, for injection molding. This grade shows an improved retention of properties after long term ageing in automotive cooling liquids. Available in: Europe and North AmericaProduct Applications: TECHNYL® A 218G1 V25 BLACK 34N is particularly recommended for the injection molding of parts in permanent contact with cooling liquids in cars, such as: - cooling and heating radiator systems, header tanks, thermostat components, inlet / outlet pipes. This product is available in black.Information provided by Rhodia, Rhodia has been acquired by Solvay.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.32 g/cc | 0.0477 lb/in³ | ISO 1183/A |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 4.0 % | 4.0 % | ISO 527 Type 1A |
| Tensile Modulus | 6.30 GPa | 914 ksi | ISO 527 Type 1A |
| Flexural Strength | 155 MPa | 22500 psi | ISO 178 |
| Flexural Modulus | 5.00 GPa | 725 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 15.0 kJ/m² | 7.14 ft-lb/in² | ISO 180/1eA |
| Charpy Impact Unnotched | 2.70 J/cm² | 12.8 ft-lb/in² | ISO 179/1eU |
| Charpy Impact, Notched | 1.30 J/cm² | 6.19 ft-lb/in² | ISO 179/1eA |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 |
| Dielectric Strength | 29.0 kV/mm | 737 kV/in | IEC 60243 |
| Dissipation Factor | 0.11 | 0.11 | IEC 60250 |
| Comparative Tracking Index | 425 V | 425 V | Solution A; IEC 60112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Moisture Content | <= 0.20 % | <= 0.20 % |
Users viewing this material also viewed the following:
- MV Labs Y300 Y2(CO3)3·xH2O Yttrium carbonate hydrate
- LyondellBasell Petrothene® NA216000 Low Density Polyethylene
- Iran Petrochemical (PCC) EX 5 HM 9450 F High Density Polyethylene
- Lubriplate SYNAC 220 Diester-Based Synthetic Air Compressor Fluid
- Solvay Specialty Polymers Solvera® PT 5071 PFPE Surface Treatment
- Sibur 23003-30T 1st Grade Polypropylene Copolymer
- Unifrax Fiberfrax® Spun High Purity Large-Diameter Fiber
- Trelleborg Emerson & Cuming EP652 Patch Paste
- Epoxy Technology EPO-TEK® 353ND High Temperature Epoxy
- Beijing Chemical Industry KAIFA® GL2200 ABS Good Flow Grade
Copyright © lookpolymers.com All Rights Reserved