Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Specialty Polymers Udel® P-1700 Polysulfone (PSU)  (Unverified Data**)

Category Polymer , Thermoplastic , Polysulfone (PSU)
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Specialty Polymers Udel® P-1700 Polysulfone (PSU)  (Unverified Data**).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Udel P-1700 polysulfone (PSU) is a tough, rigid, high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons. These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity. The resins comply with FAR 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association. - Transparent: Udel P-1700 CL 2611 CMP - Transparent: Udel P-1700 NT 06 - Transparent: Udel P-1700 NT 11 - Opaque Black : Udel P-1700 BK 937 - Opaque White: Udel P-1700 WH 6417 - Opaque White: Udel P-1700 WH 7407Information provided by Solvay Specialty Polymers.
Physical Properties Metric English Comments
Specific Gravity 1.24 g/cc
1.24 g/cc
ASTM D792
Water Absorption 0.30 %

@Time 86400 sec
0.30 %

@Time 24.0 hour
ASTM D570
Linear Mold Shrinkage, Flow 0.0070 cm/cm
0.0070 in/in
ASTM D955
Melt Flow 6.5 g/10 min

@Load 2.06 kg,
Temperature 343 °C
6.5 g/10 min

@Load 4.54 lb,
Temperature 649 °F
ASTM D1238
Mechanical Properties Metric English Comments
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Elongation at Break 50 - 100 %
50 - 100 %
ASTM D638
Tensile Modulus 2.48 GPa
360 ksi
ASTM D638
Flexural Strength 106 MPa
15400 psi
ASTM D790
Flexural Modulus 2.69 GPa
390 ksi
ASTM D790
Izod Impact, Notched 0.690 J/cm
1.29 ft-lb/in
ASTM D256
Tensile Impact Strength 420 kJ/m²
200 ft-lb/in²
ASTM D1822
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 56.0 µm/m-°C
31.1 µin/in-°F
ASTM D696
Deflection Temperature at 1.8 MPa (264 psi) 174 °C
345 °F
Unannealed; ASTM D648
Flammability, UL94 HB

@Thickness 1.50 mm
HB

@Thickness 0.0591 in
All Colors; UL 94
V-0

@Thickness 4.50 mm
V-0

@Thickness 0.177 in
NC; UL 94
Glow Wire Test 850 °C

@Thickness 0.800 mm
1560 °F

@Thickness 0.0315 in
Glow Wire Flammability Index; IEC 60695-2-12
850 °C

@Thickness 1.60 - 6.00 mm
1560 °F

@Thickness 0.0630 - 0.236 in
Glow Wire Ignition Temperature; IEC 60695-2-13
875 °C

@Thickness 0.800 mm
1610 °F

@Thickness 0.0315 in
Glow Wire Ignition Temperature; IEC 60695-2-13
960 °C

@Thickness 1.60 - 6.00 mm
1760 °F

@Thickness 0.0630 - 0.236 in
Glow Wire Flammability Index; IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 3.00e+16 ohm-cm
3.00e+16 ohm-cm
ASTM D257
Dielectric Constant 3.02

@Frequency 1.00e+6 Hz
3.02

@Frequency 1.00e+6 Hz
ASTM D150
3.03

@Frequency 60.0 Hz
3.03

@Frequency 60.0 Hz
ASTM D150
3.04

@Frequency 1000 Hz
3.04

@Frequency 1000 Hz
ASTM D150
Dielectric Strength 17.0 kV/mm
432 kV/in
ASTM D149
Dissipation Factor 0.00070

@Frequency 60.0 Hz
0.00070

@Frequency 60.0 Hz
ASTM D150
0.0010

@Frequency 1000 Hz
0.0010

@Frequency 1000 Hz
ASTM D150
0.0060

@Frequency 1.00e+6 Hz
0.0060

@Frequency 1.00e+6 Hz
ASTM D150
Processing Properties Metric English Comments
Melt Temperature 329 - 385 °C
624 - 725 °F
Mold Temperature 121 - 163 °C
250 - 325 °F
Drying Temperature 135 - 163 °C
275 - 325 °F
Dry Time 3.50 hour
3.50 hour
Shot Size 50 - 75 %
50 - 75 %
Descriptive Properties Value Comments
Agency Ratings FDA 21 CFR 177.1655
ISO 10993
ISO 10993-Part 1
NSF 51
Only Udel P-1700 NT 06 and Udel P-1700 NT 11 are NSF 51 listed. Maximum Temperature of Use: 149°C (300°F)
NSF 61
Only Udel P-1700 NT 11, Udel P-1700 BK 937, Udel P-1700 WH 6417 and Udel P-1700 WH 7407 are NSF 61 listed. Tested at 82 °C (180 °F) (Commercial Hot)
Appearance Colors Available
Transparent - Slight Yellow
Automotive Specifications ASTM D6394 SP0112
Availability Asia Pacific
Europe
North America
South America
Features Acid Resistant
Alcohol Resistant
Alkali Resistant
Autoclave Sterilizable
Biocompatible
Detergent Resistant
E-beam Sterilizable
Ethylene Oxide Sterilizable
Food Contact Acceptable
Good Chemical Resistance
Good Dimensional Stability
Good Sterilizability
Good Surface Finish
Good Toughness
Heat Sterilizable
High Heat Resistance
Hydrocarbon Resistant
Hydrolytically Stable
Radiation (Gamma) Resistant
Radiation Sterilizable
Radiotranslucent
Steam Resistant
Steam Sterilizable
Forms Pellets
Generic PSU
Processing Method Extrusion
Extrusion Blow Molding
Film Extrusion
Injection Blow Molding
Injection Molding
Machining
Pipe Extrusion
Profile Extrusion
Sheet Extrusion
Thermoforming
RoHS Compliance RoHS Compliant
Uses Appliance Components
Appliances
Automotive Electronics
Dental Applications
Electrical Parts
Electrical/Electronic Applications
Food Service Applications
Hospital Goods
Industrial Parts
Medical Appliances
Medical/Healthcare Applications
Microwave Cookware
Piping
Plumbing Parts
Surgical Instruments
Valves/Valve Parts
Copyright © lookpolymers.com All Rights Reserved