Solvay Specialty Polymers Udel® GF-120 Polysulfone (PSU) (Unverified Data**)

Category	Polymer , Thermoplastic , Polysulfone (PSU) , Polysulfone, 10% Glass Fiber Reinforced
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Udel® GF-120 Polysulfone (PSU) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Udel GF-120, resin is a 20% glass fiber reinforced polysulfone compound. Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the polysulfone resin. The high performance properties and attractive price make these resins particularly effective alternatives to metals in many engineering applications. - Black: Udel GF-120 Bk 937 - Black: Udel GF-120 BK 937 - Natural: Udel GF-120 NT 20 - Grey: Udel GF-120 GY 1234Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.40 g/cc	1.40 g/cc	ASTM D792
Linear Mold Shrinkage, Flow	0.0030 cm/cm	0.0030 in/in	ASTM D955
Melt Flow	6.5 g/10 min @Load 2.16 kg, Temperature 343 °C	6.5 g/10 min @Load 4.76 lb, Temperature 649 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength	96.5 MPa	14000 psi	ASTM D638
Elongation at Break	3.0 %	3.0 %	ASTM D638
Tensile Modulus	6.00 GPa	870 ksi	ASTM D638
Flexural Strength	148 MPa	21500 psi	ASTM D790
Flexural Modulus	5.52 GPa	801 ksi	ASTM D790
Izod Impact, Notched	0.530 J/cm	0.993 ft-lb/in	ASTM D256
Tensile Impact Strength	109 kJ/m²	51.9 ft-lb/in²	ASTM D1822

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	180 °C	356 °F	Unannealed; ASTM D648
Flammability, UL94	HB @Thickness 3.18 mm	HB @Thickness 0.125 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+16 ohm-cm	2.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.28 @Frequency 1.00e+6 Hz	3.28 @Frequency 1.00e+6 Hz	ASTM D150
	3.31 @Frequency 60.0 Hz	3.31 @Frequency 60.0 Hz	ASTM D150
Dielectric Strength	19.0 kV/mm	483 kV/in	ASTM D149
Dissipation Factor	0.0060 @Frequency 1.00e+6 Hz	0.0060 @Frequency 1.00e+6 Hz	ASTM D150
	0.0080 @Frequency 60.0 Hz	0.0080 @Frequency 60.0 Hz	ASTM D150

Processing Properties	Metric	English
Melt Temperature	343 - 399 °C	649 - 750 °F
Mold Temperature	121 - 163 °C	250 - 325 °F
Drying Temperature	149 - 163 °C	300 - 325 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Descriptive Properties	Value	Comments
Agency Ratings	ISO 10993
	ISO 10993-Part 1
	NSF 51	Maximum Temperature of Use: 149°C (300°F)
	NSF 61	Tested at 82 °C (180 °F) (Commercial Hot)
Appearance	Black
	Grey
	Natural Color
	Opaque
Availability	Asia Pacific
	Europe
	North America
	South America
Features	Acid Resistant
	Alcohol Resistant
	Alkali Resistant
	Autoclave Sterilizable
	E-beam Sterilizable
	Ethylene Oxide Sterilizable
	Food Contact Acceptable
	Good Chemical Resistance
	Good Creep Resistance
	Good Dimensional Stability
	Good Sterilizability
	Good Strength
	Heat Sterilizable
	High Heat Resistance
	High Rigidity
	Hydrocarbon Resistant
	Hydrolytically Stable
	Radiation (Gamma) Resistant
	Radiation Sterilizable
	Radiotranslucent
	Steam Resistant
	Steam Sterilizable
Filler	Glass Fiber Reinforcement
Forms	Pellets
Generic	PSU
Injection Rate	Fast
Processing Method	Extrusion
	Injection Molding
RoHS Compliance	RoHS Compliant
Screw Compression Ratio	2.0:1.0
Uses	Appliance Components
	Appliances
	Automotive Electronics
	Bobbins
	Dental Applications
	Electrical Parts
	Electrical/Electronic Applications
	Fittings
	Food Service Applications
	Hospital Goods
	Industrial Parts
	Medical Appliances
	Medical/Healthcare Applications
	Microwave Cookware
	Piping
	Plumbing Parts
	Surgical Instruments
	Valves/Valve Parts

Users viewing this material also viewed the following: