Solvay Specialty Polymers Amodel® A-4122 NL WH 905 Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 20% Glass Fiber Reinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® A-4122 NL WH 905 Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Amodel A-4122 NL resin is a 22% glass reinforced, high-reflectivity white grade of polyphthalamide (PPA), designed to provide high crystallinity when molded in water-cooled molds. This material exhibits high heat resistance, high strength and stiffness over a broad temperature range. It also offers low moisture absorption, excellent chemical resistance and excellent electrical properties. Its rapid crystallization rate and high flow can result in short cycles and therefore high molding productivity and lower part cost. - White: A-4122 NL WH 905Injection Notes: A general purpose screw is recommended, with minimum back pressure. Injection Pressure: 3 to 4 in/secInformation provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.48 g/cc	0.0535 lb/in³	ISO 1183/A
Filler Content	22 %	22 %	Glass Fiber Reinforcement
Water Absorption	0.24 % @Time 86400 sec	0.24 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0040 cm/cm	0.0040 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0060 cm/cm	0.0060 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	124	124	R-Scale; ASTM D785
Tensile Strength at Break	123 MPa	17800 psi	ASTM D638
Elongation at Break	1.6 %	1.6 %	ASTM D638
Tensile Modulus	9.17 GPa	1330 ksi	ASTM D638
Flexural Yield Strength	171 MPa	24800 psi	ASTM D790
Flexural Modulus	8.00 GPa	1160 ksi	ASTM D790
Izod Impact, Notched	0.270 J/cm	0.506 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	11.0 µm/m-°C @Temperature 150 - 250 °C	6.11 µin/in-°F @Temperature 302 - 482 °F	TMA; ASTM E831
	23.0 µm/m-°C @Temperature 0.000 - 100 °C	12.8 µin/in-°F @Temperature 32.0 - 212 °F	TMA; ASTM E831
CTE, linear, Transverse to Flow	86.0 µm/m-°C @Temperature 0.000 - 100 °C	47.8 µin/in-°F @Temperature 32.0 - 212 °F	ASTM E831
	130 µm/m-°C @Temperature 150 - 250 °C	72.2 µin/in-°F @Temperature 302 - 482 °F	ASTM E831
Melting Point	324 °C	615 °F	Peak; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	313 °C	595 °F	Unannealed; ASTM D648

Optical Properties	Metric	English	Comments
Reflection Coefficient, Visible (0-1)	0.90	0.90	ASTM E1331

Processing Properties	Metric	English
Rear Barrel Temperature	318 - 324 °C	604 - 615 °F
Front Barrel Temperature	327 - 332 °C	621 - 630 °F
Melt Temperature	329 - 343 °C	624 - 649 °F
Mold Temperature	65.6 - 93.3 °C	150 - 200 °F
Drying Temperature	120 °C	248 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.045 %	0.045 %

Descriptive Properties	Value	Comments
Appearance	White
Automotive Specifications	ASTM D6779 PA1061
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Fast Molding Cycle
	Good Chemical Resistance
	Good Color Stability
	High Reflectivity
	High Stiffness
	Low Moisture Absorption
Forms	Pellets
Generic	PPA
Processing Method	Injection Molding
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Automotive Electronics
	Automotive Under the Hood
	Electrical/Electronic Applications

Users viewing this material also viewed the following: