POLYMER SEARCH

Shin-Etsu Silicones KEG-2000-20A/B Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	Shin-Etsu Silicones
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Shin-Etsu Silicones KEG-2000-20A/B Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

KEG-2000-20 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. It's viscosity is low enough to allow easy pumping through most injection molding systems.FeaturesRapid cure time at elevated temperatureLong pot life at room temperatureApplicationsO-ringsDiaphragmsCappingRubber rollersConnector packingsOther electrical partsInformation Provided by Shin-Etsu Silicones of America, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.08 g/cc	1.08 g/cc

Mechanical Properties	Metric	English
Hardness, Shore A	22	22
Tensile Strength	6.21 MPa	900 psi
Elongation at Yield	800 %	800 %
100% Modulus	0.000345 GPa	0.0500 ksi
Tear Strength	20.0 kN/m	114 pli
Compression Set	6.0 % @Temperature 180 Â°C, Time 79200 sec	6.0 % @Temperature 356 Â°F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	240 min @Temperature 200 Â°C	4.00 hour @Temperature 392 Â°F	Post Cure

Descriptive Properties	Value	Comments
Regulatory Testing	Class VI, FDA

Users viewing this material also viewed the following: