SABIC Innovative Plastics ULTEM STM1600 PEI Copolymer

Category	Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	ULTEM
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics ULTEM STM1600 PEI Copolymer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Siltem 1600 is a flexible copolymer designed for wire and cable applications. It offers a halogen free (according VDE 0472) flame retardant solution that also offers low smoke emission and toxicity. It is an amber colored transparent material that can be selfcolored and easily processed on conventional equipment. The material may also have a fit in flexible profiles or injection molded parts.

Physical Properties	Metric	English	Comments
Specific Gravity	1.19 g/cc	1.19 g/cc	ASTM D792
Density	1.19 g/cc	0.0430 lb/inÂ³	ISO 1183
Water Absorption	0.58 % @Time 86400 sec	0.58 % @Time 24.0 hour	ISO 62-1
Water Absorption at Saturation	0.58 %	0.58 %	ISO 62
Linear Mold Shrinkage, Flow	0.0086 - 0.0101 cm/cm @Thickness 3.20 mm	0.0086 - 0.0101 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	8.6 g/10 min @Load 6.60 kg, Temperature 295 Â°C	8.6 g/10 min @Load 14.6 lb, Temperature 563 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	72	72	ASTM D2240
Tensile Strength at Break	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D638
	41.0 MPa	5950 psi	50 mm/min; ISO 527
Tensile Strength, Yield	42.0 MPa	6090 psi	50 mm/min; ISO 527
	43.0 MPa	6240 psi	Type I, 5 mm/min; ASTM D638
Elongation at Break	64 %	64 %	Type I, 5 mm/min; ASTM D638
	74 %	74 %	50 mm/min; ISO 527
Elongation at Yield	10 %	10 %	Type I, 5 mm/min; ASTM D638
	10 %	10 %	50 mm/min; ISO 527
Tensile Modulus	1.38 GPa	200 ksi	1 mm/min; ISO 527
	1.40 GPa	203 ksi	5 mm/min; ASTM D638
Flexural Strength	48.0 MPa	6960 psi	ASTM D790
Flexural Yield Strength	48.0 MPa	6960 psi	1.3 mm/min, 50 mm span; ASTM D790
	55.0 MPa	7980 psi	2 mm/min; ISO 178
Flexural Modulus	1.25 GPa	181 ksi	ASTM D790
	1.25 GPa	181 ksi	1.3 mm/min, 50 mm span; ASTM D790
	1.25 GPa	181 ksi	2 mm/min; ISO 178
Izod Impact, Notched	4.12 J/cm	7.72 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	36.0 kJ/mÂ²	17.1 ft-lb/inÂ²	80104; ISO 180/1A
	25.0 kJ/mÂ² @Temperature -30.0 Â°C	11.9 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1A
Taber Abrasion, mg/1000 Cycles	50	50	CS-17, 1 kg; ASTM D1044

Thermal Properties	Metric	English	Comments
Transformation Temperature, Tg	195 Â°C	383 Â°F	DMA
Deflection Temperature at 0.46 MPa (66 psi)	144 Â°C	291 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
Deflection Temperature at 1.8 MPa (264 psi)	80.0 Â°C @Thickness 3.20 mm	176 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	167 Â°C	333 Â°F	Rate B/120; ISO 306
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	UL 94 by SABIC-IP
Oxygen Index	48 %	48 %	ASTM D2863

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	ASTM D257
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	ASTM D257
Dielectric Constant	3.0 @Frequency 100000 Hz	3.0 @Frequency 100000 Hz	ASTM D150
	3.02 @Frequency 1.00e+6 Hz	3.02 @Frequency 1.00e+6 Hz	ASTM D150
	3.14 @Frequency 100 Hz	3.14 @Frequency 100 Hz	ASTM D150
Dielectric Strength	16.6 kV/mm @Thickness 3.20 mm	422 kV/in @Thickness 0.126 in	in oil; ASTM D149
Dissipation Factor	0.0055 @Frequency 1.00e+6 Hz	0.0055 @Frequency 1.00e+6 Hz	ASTM D150
	0.0064 @Frequency 100000 Hz	0.0064 @Frequency 100000 Hz	ASTM D150
	0.014 @Frequency 100 Hz	0.014 @Frequency 100 Hz	ASTM D150

Users viewing this material also viewed the following: