Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics ULTEM SILTEM-STM1500 PEI (Europe-Africa-Middle East)

Category Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name ULTEM
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics ULTEM SILTEM-STM1500 PEI (Europe-Africa-Middle East).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
SILTEM STM1500 is a flexible siloxane-polyetherimide copolymer for cable and wire coatings. RoHS compliant.
Physical Properties Metric English Comments
Density 1.18 g/cc
0.0426 lb/in³
ISO 1183
Water Absorption at Saturation 0.12 %
0.12 %
ISO 62
Linear Mold Shrinkage, Flow 0.012 - 0.014 cm/cm
0.012 - 0.014 in/in
on Tensile Bar; SABIC Method
Melt Index of Compound 8.0 g/10 min

@Load 2.16 kg,
Temperature 320 °C
 8.0 g/10 min

@Load 4.76 lb,
Temperature 608 °F
 MVR [cm^3/10 min]; ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength at Break 25.0 MPa
3630 psi
50 mm/min; ISO 527
Tensile Strength, Yield 20.0 MPa
2900 psi
50 mm/min; ISO 527
Elongation at Break 110 %
110 %
50 mm/min; ISO 527
Elongation at Yield 15 %
15 %
50 mm/min; ISO 527
Tensile Modulus 0.590 GPa
85.6 ksi
1 mm/min; ISO 527
Flexural Strength 18.0 MPa
2610 psi
2 mm/min; ISO 178
Flexural Yield Strength 20.0 MPa
2900 psi
2 mm/min; ISO 178
Flexural Modulus 0.470 GPa
68.2 ksi
2 mm/min; ISO 178
Izod Impact, Notched (ISO) 25.0 kJ/m²
11.9 ft-lb/in²
80*10*4; ISO 180/1A
15.0 kJ/m²

@Temperature -30.0 °C
 7.14 ft-lb/in²

@Temperature -22.0 °F
 80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) NB
NB
80*10*4; ISO 180/1U
NB

@Temperature -30.0 °C
 NB

@Temperature -22.0 °F
 80*10*4; ISO 180/1U
Taber Abrasion, mg/1000 Cycles 60
60
CS-17, 1 kg; SABIC Method
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 110 µm/m-°C

@Temperature 23.0 - 80.0 °C
 61.1 µin/in-°F

@Temperature 73.4 - 176 °F
 ISO 11359-2
CTE, linear, Transverse to Flow 90.0 µm/m-°C

@Temperature 23.0 - 80.0 °C
 50.0 µin/in-°F

@Temperature 73.4 - 176 °F
 ISO 11359-2
Vicat Softening Point 75.0 °C
167 °F
Rate B/50; ISO 306
78.0 °C
172 °F
Rate B/120; ISO 306
Flammability, UL94 V-1

@Thickness 1.60 mm
 V-1

@Thickness 0.0630 in
 UL 94 by SABIC-IP
Oxygen Index 48 %
48 %
ISO 4589
Glow Wire Test 960 °C

@Thickness 3.20 mm
 1760 °F

@Thickness 0.126 in
 IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 4.70e+14 ohm-cm
4.70e+14 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
ROA; IEC 60093
Dielectric Constant 3.0

@Frequency 100 Hz
 3.0

@Frequency 100 Hz
 IEC 60250
Dielectric Strength 19.0 kV/mm

@Thickness 3.20 mm
 483 kV/in

@Thickness 0.126 in
 in oil; IEC 60243-1
Dissipation Factor 0.0091

@Frequency 100 Hz
 0.0091

@Frequency 100 Hz
 IEC 60250
Comparative Tracking Index >= 100 V
>= 100 V
IEC 60112
175 V
175 V
IEC 60112
Descriptive Properties Value Comments
Ball Pressure Test, 75°C +/- 2°C PASSES
IEC 60695-10-2
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved