- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- SABIC Innovative Plastics LNP THERMOCOMP MF006S PP
SABIC Innovative Plastics LNP THERMOCOMP MF006S PP
| Category | Polymer , Thermoplastic , Polypropylene (PP) |
| Manufacturer | SABIC Innovative Plastics (GE Plastics) |
| Trade Name | LNP THERMOCOMP |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SABIC Innovative Plastics LNP THERMOCOMP MF006S PP.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
LNP* THERMOCOMP* MF006S is a compound based on Polypropylene resin containing 30% Glass Fiber. Added features of this material include: Heat Stabilized.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | ASTM D792 |
| 1.12 g/cc | 0.0405 lb/in³ | ISO 1183 | |
| Linear Mold Shrinkage, Flow | 0.0065 cm/cm @Time 86400 sec |
0.0065 in/in @Time 24.0 hour |
ISO 294 |
| 0.0060 - 0.0080 cm/cm @Time 86400 sec |
0.0060 - 0.0080 in/in @Time 24.0 hour |
ASTM D955 | |
| Linear Mold Shrinkage, Transverse | 0.0098 cm/cm @Time 86400 sec |
0.0098 in/in @Time 24.0 hour |
ISO 294 |
| 0.0090 - 0.011 cm/cm @Time 86400 sec |
0.0090 - 0.011 in/in @Time 24.0 hour |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 80.0 MPa | 11600 psi | ISO 527 |
| 81.0 MPa | 11700 psi | ASTM D638 | |
| Elongation at Break | 1.8 % | 1.8 % | ASTM D638 |
| 3.0 % | 3.0 % | ISO 527 | |
| Tensile Modulus | 9.12 GPa | 1320 ksi | 1 mm/min; ISO 527 |
| 14.47 GPa | 2099 ksi | 50 mm/min; ASTM D638 | |
| Flexural Strength | 131 MPa | 19000 psi | ASTM D790 |
| 135 MPa | 19600 psi | ISO 178 | |
| Flexural Modulus | 6.20 GPa | 899 ksi | ASTM D790 |
| 6.80 GPa | 986 ksi | ISO 178 | |
| Izod Impact, Notched | 0.530 J/cm | 0.993 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 6.03 J/cm | 11.3 ft-lb/in | ASTM D4812 |
| Izod Impact, Notched (ISO) | 5.00 kJ/m² | 2.38 ft-lb/in² | 80*10*4; ISO 180/1A |
| Izod Impact, Unnotched (ISO) | 37.0 kJ/m² | 17.6 ft-lb/in² | 80*10*4; ISO 180/1U |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 68.4 µm/m-°C @Temperature -40.0 - 40.0 °C |
38.0 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| 69.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
38.3 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |
| CTE, linear, Transverse to Flow | 44.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
24.4 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 |
| 45.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
25.0 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 161 °C | 322 °F | Flatw 80*10*4 sp=64mm; ISO 75/Bf |
| 157 °C @Thickness 3.20 mm |
315 °F @Thickness 0.126 in |
unannealed; ASTM D648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 141 °C | 286 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 133 °C @Thickness 3.20 mm |
271 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PH 51 T 60 PP, 60% mineral filling
- Osprey Metals Fe30Cr Binary Alloy Powder (Grade 95% - 16)
- SABIC Innovative Plastics LNP KONDUIT OX11314 PPS (Europe-Africa-Middle East)
- PolyOne Dynaflex™ G7660-9 (Black) Thermoplastic Elastomer (TPE)
- GrafTech A1 Acrylic Based Adhesive
- Sylvin Technologies 9604-90 LMW Clear PVC for Injection Molding
- UBE 5021T Nylon 6/66 Monofilament (Drawing Ratio=5)
- DuPont Teijin Films Mylar® WC11/WC22 Polyester Film, 300 Gauge
Copyright © lookpolymers.com All Rights Reserved