- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyester, TP
- Polyethylene Terephthalate (PET)
- SABIC Innovative Plastics LNP STAT-KON Valox_VCF2020 PET
SABIC Innovative Plastics LNP STAT-KON Valox_VCF2020 PET
| Category | Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) |
| Manufacturer | SABIC Innovative Plastics (GE Plastics) |
| Trade Name | LNP STAT-KON |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SABIC Innovative Plastics LNP STAT-KON Valox_VCF2020 PET.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
LNP* Stat-kon* Valox_VCF2020 compound is a 20% carbon fiber reinforced PET. Conductive applications.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.41 g/cc | 1.41 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm |
0.0050 - 0.0090 in/in @Thickness 0.126 in |
SABIC Method |
| Linear Mold Shrinkage, Transverse | 0.0070 - 0.011 cm/cm @Thickness 3.20 mm |
0.0070 - 0.011 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Flow | 47 g/10 min @Load 5.00 kg, Temperature 266 °C |
47 g/10 min @Load 11.0 lb, Temperature 511 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 152 MPa | 22000 psi | Type I, 5 mm/min; ASTM D638 |
| Tensile Strength, Yield | 152 MPa | 22000 psi | Type I, 5 mm/min; ASTM D638 |
| Elongation at Break | 1.6 % | 1.6 % | Type I, 5 mm/min; ASTM D638 |
| Elongation at Yield | 1.6 % | 1.6 % | Type I, 5 mm/min; ASTM D638 |
| Tensile Modulus | 16.75 GPa | 2429 ksi | 5 mm/min; ASTM D638 |
| Flexural Strength | 219 MPa | 31800 psi | 1.3 mm/min, 50 mm span; ASTM D790 |
| Flexural Modulus | 12.9 GPa | 1870 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
| Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 3.84 J/cm | 7.19 ft-lb/in | ASTM D4812 |
| Dart Drop, Total Energy | 3.00 J @Temperature 23.0 °C |
2.21 ft-lb @Temperature 73.4 °F |
ASTM D3763 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 19.8 µm/m-°C @Temperature -40.0 - 40.0 °C |
11.0 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| CTE, linear, Transverse to Flow | 140 µm/m-°C @Temperature -40.0 - 40.0 °C |
77.8 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| Deflection Temperature at 0.46 MPa (66 psi) | 208 °C @Thickness 3.20 mm |
406 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 245 °C @Thickness 3.20 mm |
473 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
| Vicat Softening Point | 247 °C | 477 °F | Rate B/50; ASTM D1525 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.0 ohm-cm | 1.0 ohm-cm | IEC 60093 |
Users viewing this material also viewed the following:
- Multibase TPSiV™ 3340-60A Thermoplastic Silicone Vulcanizate
- Plastcom SLOVAMID 6 HI HV TS PA6 with impact modifier
- SABIC Innovative Plastics ULTEM 2300F PEI (Europe-Africa-Middle East)
- Teknor Apex APEX® 1017 Polyvinyl Chloride, Semi-Rigid
- Zeon Chemicals Hydrin® T3100 Polyepichlorohydrin Elastomer
- A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene
- A. Schulman POLYFORT™ FPP 1245 CaCO3 Filled Copolymer Polypropylene
- BASF Ultramid® HPN 9362 40% Mineral Filled PA6 (Dry)
- Akro-Plastic Akromid® A3 GF 20 (2419) PA 6.6 Dry, 20% Glass Filled
- Styrolution NAS® 30 Series High Performance Styrenic
Copyright © lookpolymers.com All Rights Reserved