- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- SABIC Innovative Plastics LNP LUBRICOMP Lexan_LF1000 PC (Asia Pacific)
SABIC Innovative Plastics LNP LUBRICOMP Lexan_LF1000 PC (Asia Pacific)
| Category | Polymer , Thermoplastic , Polycarbonate (PC) |
| Manufacturer | SABIC Innovative Plastics (GE Plastics) |
| Trade Name | LNP LUBRICOMP |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SABIC Innovative Plastics LNP LUBRICOMP Lexan_LF1000 PC (Asia Pacific).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.26 g/cc | 1.26 g/cc | ASTM D792 |
| Water Absorption | 0.15 % @Time 86400 sec |
0.15 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm |
0.0050 - 0.0070 in/in @Thickness 0.126 in |
SABIC Method |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM D785 |
| Tensile Strength, Yield | 66.0 MPa | 9570 psi | SABIC - Japan Method |
| Elongation at Break | 220 % | 220 % | SABIC - Japan Method |
| Flexural Strength | 84.0 MPa | 12200 psi | ASTM D790 |
| Flexural Modulus | 2.15 GPa | 312 ksi | ASTM D790 |
| Izod Impact, Notched | 1.76 J/cm | 3.30 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 50.0 - 70.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
27.8 - 38.9 µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
| Deflection Temperature at 0.46 MPa (66 psi) | 136 °C @Thickness 3.20 mm |
277 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.70 mm |
V-0 @Thickness 0.0669 in |
UL 94 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Users viewing this material also viewed the following:
- Osprey Metals 17-4 PH Stainless Steel Powder (Grade 90% - 22)
- Resinoid 1363 Phenolic Molding, Glass Reinforced
- A. Schulman POLYPUR™ FPU 1103F Thermoplastic Polyurethane Compound
- Hexcel® HexForce™ 3788 Fiber Glass Fabric
- Loctite® 3180 Deep Potting Polyurethane
- Chevron Phillips Marlex® 5104 LDPE Blow Molding Resin
- ExxonMobil ESCOREZ™ 5690 Petroleum Hydrocarbon Resin
- Azdel Plus C401-B01 40% Chopped Fiber Mat / PP Resin Matrix
- Adamas Adalon® 463 PTFE, 15% Special Polyimide
Copyright © lookpolymers.com All Rights Reserved