- HOME
- POLYMER SEARCH
- Renewable/Recycled Polymer
- Ravago Manufacturing Americas Enviramid™ N1340MGHL BK Post Consumer Recycle Nylon 66, 25/15% Mineral/Glass Filled
Ravago Manufacturing Americas Enviramid™ N1340MGHL BK Post Consumer Recycle Nylon 66, 25/15% Mineral/Glass Filled
| Category | Polymer , Renewable/Recycled Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass/Mineral Filled |
| Manufacturer | Ravago Manufacturing Americas, LLC |
| Trade Name | Enviramid™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ravago Manufacturing Americas Enviramid™ N1340MGHL BK Post Consumer Recycle Nylon 66, 25/15% Mineral/Glass Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Heat Stabilized, Lubricated, Black, and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.50 g/cc | 1.50 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0040 - 0.0070 cm/cm @Thickness 3.17 mm |
0.0040 - 0.0070 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 105 MPa | 15200 psi | ASTM D638 |
| Elongation at Break | 1.5 % | 1.5 % | ASTM D638 |
| Flexural Strength | 110.0 MPa | 15950 psi | ASTM D790 |
| Flexural Modulus | 6.400 GPa | 928.2 ksi | ASTM D790 |
| Izod Impact, Notched | 0.267 J/cm | 0.500 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Polykemi AB SCANMID 6 B12^ NH11L Nylon 6, Flame Retardant, Halogen Free
- Huntsman HT 3380-1 Special Hardener
- Haynes 230® alloy, 20% cold reduction, 1066°C anneal for 5 minutes
- Sumitomo Bakelite North America RX® 431 Cellulose Reinforced Phenolic Novolac
- A. Schulman POLYFORT™ FPP 1640 Glass Reinforced, Mineral Fortified Homopolymer Polypropylene
- Polyram PlusTek PB891 Nylon 6, Impact Modified
- A. Schulman CP812 Linear, Medium-Density Polyethylene
- Arlon 51866R015 0.0170" Cured/Uncured Silicone Rubber with Fiberglass Substrate
- Carpenter Pyromet® CTX-3 Superalloy, Heat Treatment for Brazing Cycles over 982°C
Copyright © lookpolymers.com All Rights Reserved