- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Quantum Nylon 6/6 30% Glass Fiber Filled
Quantum Nylon 6/6 30% Glass Fiber Filled
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Quantum Advanced Engineering Plastics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quantum Nylon 6/6 30% Glass Fiber Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Quantum Advanced Engineering Plastics
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.34 g/cc | 1.34 g/cc | ASTM D792 |
| Water Absorption | 0.70 % | 0.70 % | ASTM D570 |
| Water Absorption at Saturation | 5.5 % | 5.5 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 100 | 100 | ASTM D785 |
| Hardness, Rockwell R | 122 | 122 | ASTM D785 |
| Hardness, Shore D | 80 | 80 | ASTM 2240 |
| Tensile Strength | 159 MPa | 23000 psi | ASTM D638 |
| Elongation at Break | 6.0 % | 6.0 % | ASTM D638 |
| Tensile Modulus | 8.27 GPa | 1200 ksi | ASTM D638 |
| Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
| Flexural Modulus | 0.758 GPa | 110 ksi | ASTM D790 |
| Compressive Strength | 138 MPa | 20000 psi | ASTM D695 |
| Izod Impact, Notched | 1.07 J/cm | 2.00 ft-lb/in | ASTM D256 |
| Coefficient of Friction | 0.31 | 0.31 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 27.0 µm/m-°C | 15.0 µin/in-°F | ASTM D696 |
| Thermal Conductivity | 0.288 W/m-K | 2.00 BTU-in/hr-ft²-°F | ASTM C177 |
| Melting Point | 260 °C | 500 °F | ASTM D3417 |
| Maximum Service Temperature, Air | 104 °C | 220 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 260 °C | 500 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 252 °C | 485 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.6 @Frequency 1.00e+6 Hz |
3.6 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Dielectric Strength | 13.8 kV/mm | 350 kV/in | ASTM D149 |
| Dissipation Factor | 0.0016 @Frequency 1.00e+6 Hz |
0.0016 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| FDA Compliance | no |
Users viewing this material also viewed the following:
- Gouda Vuurvast VIBRON 180 Dense Vibrating Refractory Castable
- Solvay Specialty Polymers Tecnoflon® PL 455 Fluoroelastomer
- Techmer ES HiFill FR® PA6 GF13 FR 13% Glass Filled
- Chesterton OPTICOOL™ 570 Lubrication
- ChevronTexaco URSA® SAE 30 Super Plus
- ConocoPhillips Hydroclear® 32 Turbine Oil
- DuPont Performance Polymers Sorona® 3015G NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**)&
- ATI Allegheny Ludlum Martensitic Stainless Steel Type 410, Hardened + 204°C Temper
Copyright © lookpolymers.com All Rights Reserved