- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Sulfide (PPS)
- Polyphenylene Sulfide (PPS) with 40% Glass Fiber Filler
- Quadrant EPP Techtron® PSGF PPS - Compression Molded 40% Glass Reinforced Polyphenylene Sulfide (ASTM Product Data Sheet)
Quadrant EPP Techtron® PSGF PPS - Compression Molded 40% Glass Reinforced Polyphenylene Sulfide (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS) with 40% Glass Fiber Filler |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Techtron® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Techtron® PSGF PPS - Compression Molded 40% Glass Reinforced Polyphenylene Sulfide (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.70 g/cc | 1.70 g/cc | ASTM D792 |
| Water Absorption | 0.020 % | 0.020 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.030 % | 0.030 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 94 | 94 | ASTM D785 |
| Hardness, Rockwell R | 125 | 125 | ASTM D785 |
| Hardness, Shore D | 86 | 86 | ASTM D2240 |
| Tensile Strength | 34.5 MPa | 5000 psi | ASTM D638 |
| Elongation at Break | 1 % | 1 % | ASTM D638 |
| Tensile Modulus | 5.03 GPa | 730 ksi | ASTM D638 |
| Flexural Strength | 159 MPa | 23000 psi | ASTM D790 |
| Flexural Modulus | 6.89 GPa | 1000 ksi | ASTM D790 |
| Compressive Strength | 165 MPa | 24000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 8.96 GPa | 1300 ksi | ASTM D695 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 45.0 µm/m-°C @Temperature -40.0 - 149 °C |
25.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.303 W/m-K | 2.10 BTU-in/hr-ft²-°F | ASTM F433 |
| Melting Point | 282 °C | 540 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 232 °C | 450 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 254 °C | 490 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Strength | 15.2 kV/mm | 385 kV/in | Short Term; ASTM D149 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 7 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- LyondellBasell Petrothene® GA616050 Linear Low Density Polyethylene
- Indium Corp. Indalloy 55 Bismuth Solder Alloy
- SABIC Innovative Plastics LNP LUBRICOMP OCL36A PPS - Branched (Asia Pacific)
- Sibur BSK-1500 Styrene-Butadiene Rubber (SBR)
- Borealis Bormed™ LE6603-PH LDPE for Healthcare Applications
- Toho Tenax Tenax® HTA 5131 Chopped Carbon Fiber
- Eastman Tenite 285A2R30018 Cellulose Acetate Butyrate, Natural, Trsp
- Eastman Tenite Butyrate 565A2R30016 Natural, Trsp Cellulose Acetate Butyrate
- A. Schulman ComAlloy Comtuf® 103 Polypropylene, Glass Reinforced, Chemically Coupled, Impact Modified
- Arkema Group KYNAR® Latex 32 Polyvinylidene Fluoride
Copyright © lookpolymers.com All Rights Reserved