Quadrant EPP Nylatron® 703XL PA 6 + internal lubricant, cast (ISO Data)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass Fiber/Solid Lube Filled
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Nylatron®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Nylatron® 703XL PA 6 + internal lubricant, cast (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This high performance cast nylon 6 bearing grade provides an even better wear resistance than Nylatron NSM, combined with good pressure-velocity capabilities and a near zero level of “stick-slip”. The elimination of stick-slip, mostly associated with chatter or squeaking, provides an amount of motion control for high-precision applications. High mechanical strength, stiffness, hardness and toughness Good fatigue resistance High mechanical damping ability Good sliding properties Excellent wear resistance Good electrical insulating properties Good resistance to high energy radiation (gamma- and X-rays) Good machinability

Physical Properties	Metric	English	Comments
Density	1.11 g/cc	0.0401 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	2.0 %	2.0 %	50% RH
Water Absorption at Saturation	6.3 %	6.3 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	59	59	ISO 2039-2
Hardness, Shore D	73	73
Ball Indentation Hardness	120 MPa	17400 psi	ISO 2039-1
Tensile Strength	60.0 MPa	8700 psi	at Yield; ISO 527-1/-2
Elongation at Break	15 %	15 %	ISO 527-1/-2
Elongation at Yield	6.0 %	6.0 %	ISO 527-1/-2
Tensile Modulus	2.75 GPa	399 ksi	ISO 527-1/-2
Compressive Strength	26.0 MPa @Strain 1 %	3770 psi @Strain 1 %	ISO 604
	48.0 MPa @Strain 2 %	6960 psi @Strain 2 %	ISO 604
	69.0 MPa @Strain 5 %	10000 psi @Strain 5 %	ISO 604
K Factor (ISO)	2.5 µm/km	2.5 µm/km
Charpy Impact Unnotched	2.50 J/cm²	11.9 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.12 - 0.18	0.12 - 0.18
Limiting Pressure Velocity	0.300 MPa-m/sec	8570 psi-ft/min	at 1 m/s unlubricated
	0.480 MPa-m/sec	13700 psi-ft/min	at 0.1 m/s unlubricated

Thermal Properties	Metric	English	Comments
CTE, linear	100 µm/m-°C @Temperature 23.0 - 100 °C	55.6 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F
Melting Point	215 °C	419 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	90.0 °C	194 °F	Continuous; 20,000 h
	105 °C	221 °F	Continuous; 5,000 h
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	ISO 75-1/-2
Flammability, UL94	HB	HB
Oxygen Index	<= 20 %	<= 20 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	No	No
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Unacceptable	Unacceptable
Acids, Weak	Limited	Limited
Alcohols	Limited	Limited
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: