- HOME
- POLYMER SEARCH
- Thermoplastic
- ASA Polymer
- Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
- Polyram RamShine PAS701 ASA, UV Stabilized
Polyram RamShine PAS701 ASA, UV Stabilized
| Category | Polymer , Thermoplastic , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamShine PAS701 ASA, UV Stabilized.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
UV stabilized general purpose injection molding ASAInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | DIN 53479 |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | |
| Melt Flow | 14 g/10 min @Load 2.10 kg, Temperature 220 °C |
14 g/10 min @Load 4.63 lb, Temperature 428 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | ASTM-D638 |
| Elongation at Break | 60 % | 60 % | ASTM-D638 |
| Tensile Modulus | 1.80 GPa | 261 ksi | ASTM-D790 |
| Flexural Strength | 70.0 MPa | 10200 psi | ASTM-D790 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ASTM-D790 |
| Izod Impact, Notched | 2.20 J/cm @Temperature 23.0 °C |
4.12 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Hot Ball Pressure Test | 90.0 °C | 194 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 96.0 °C | 205 °F | DIN 53461 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | DIN 53482 |
Users viewing this material also viewed the following:
- IPB Veralite® 100 Transparent APET Sheet
- SABIC Innovative Plastics NORYL GTX GTX989 PPE+PA
- A. Schulman POLYBATCH™ Treated Pine 60175U/4 Concentrate Based In LLDPE
- DuPont Performance Polymers Delrin® 100ST BK602 Acetal (POM) (Unverified Data**)
- Denka REOMER G G8053 Thermoplastic Elastomer, For Injection Molding
- DuPont Performance Polymers Zytel® 73G30HSL NC010 Nylon 6 (Unverified Data**)
- Addcomp ADD-VANCE® AS 838 Anti-static masterbatch, PP based
- BASF Methylformate, Pure
- BASF Novolen® 1101 R Polypropylene
- 3M Scotch® 2480S Ultimate Paint Edge Masking Tape
Copyright © lookpolymers.com All Rights Reserved