- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate/ABS Alloy, Unreinforced
- Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding
Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding
| Category | Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Unreinforced , Polycarbonate (PC) |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | DIN 53479 |
| Water Absorption | 0.60 % | 0.60 % | DIN 53495 |
| Linear Mold Shrinkage | 0.0050 - 0.0080 cm/cm | 0.0050 - 0.0080 in/in | |
| Melt Flow | 30 g/10 min @Load 5.00 kg, Temperature 260 °C |
30 g/10 min @Load 11.0 lb, Temperature 500 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 50.0 MPa | 7250 psi | ASTM-D638 |
| Elongation at Break | 25 % | 25 % | ASTM-D638 |
| Tensile Modulus | 2.20 GPa | 319 ksi | ASTM-D790 |
| Izod Impact, Notched | 5.00 J/cm @Temperature 23.0 °C |
9.37 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 120 °C | 248 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | DIN 53461 |
| Vicat Softening Point | 116 °C | 241 °F | ASTM-D1525 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | DIN 53482 |
| Dielectric Strength | 24.0 kV/mm | 610 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Nilit FRIANYL A63 AV15 Nylon 6.6 for injection molding
- Fiberfil® J-60/30/E/NS Polypropylene Homopolymer, 30% Glass Reinforced, Chemically coupled, NSF listed
- Skamol Group SUPER 1100 E Calcium Silicate Insulating Slab
- Solvay JAGUAR® HP 8 COS Surfactant
- ExxonMobil Isopar™ V Isoparaffin Fluid
- Ensinger Tecaform™ SAN Polyacetal (POM)
- Albis Plastics Tedur® L 9523 PPS, 60% Glass Fiber/Mineral
- BASF Lupranate® 275 Isocyanate
- Materion Beryllium Copper Alloy 3 Tube; HT (TH04) Temper; up to 76 mm o.d. (UNS C17510)
Copyright © lookpolymers.com All Rights Reserved