- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- PolyOne Therma-Tech™ NJC-5000 TC NATURAL Nylon 12 (discontinued **)
PolyOne Therma-Tech™ NJC-5000 TC NATURAL Nylon 12 (discontinued **)
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Therma-Tech™ NJC-5000 TC NATURAL Nylon 12
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.39 g/cc | 1.39 g/cc | ASTM D792 |
| Water Absorption | 0.10 % @Thickness 0.508 mm |
0.10 % @Thickness 0.0200 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0079 cm/cm | 0.0079 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 43.0 MPa | 6240 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| 69.57 MPa | 10090 psi | Type 1 - Rigids, 0.2 in/min, 50% in/in; ASTM D638 | |
| Elongation at Break | 1.6 % | 1.6 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 0.848 GPa | 123 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 68.40 MPa | 9921 psi | ASTM D790 |
| Flexural Modulus | 5.52 GPa | 800 ksi | ASTM D790 |
| Izod Impact, Notched | 0.267 J/cm @Thickness 3.17 mm, Temperature 23.0 °C |
0.500 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | >= 2.02 W/m-K | >= 14.0 BTU-in/hr-ft²-°F | ASTM C177 |
| Deflection Temperature at 1.8 MPa (264 psi) | 143.0 °C | 289.4 °F | Unannealed, 0.062 in bars; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 22000 ohm | 22000 ohm | ASTM D257 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Product Form | Pellets |
Users viewing this material also viewed the following:
- SABIC 518N Linear Low Density Polyethylene for Blown Film
- Premix Thermoplastics PRE-ELEC® PP 1380
- Kraton® D1102 + LDPE blend (6/94)
- SABIC Innovative Plastics LNP LUBRICOMP DL003P PC (Asia Pacific)
- A. Schulman ComAlloy® E-14756 Flame Retardant Easy Flow Polycarbonate Alloy
- Master Bond Supreme 10HTN Nickel Filled Electrically Conductive One Part Epoxy
- Goodfellow Nickel 80/Iron 20 Alloy
- CP-Polymer-Technik Wellamid® 6000 GV 35 HWCP 35% Glass Fiber Nylon 6, Heat Stabilized, Dry
- 3M 1267 EMI Shielding Tape
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane, 310ºF Cure Temperature
Copyright © lookpolymers.com All Rights Reserved