PolyOne OnFlex™ S KA 40A-3S1767 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ S KA 40A-3S1767 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™-S KA thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide polymers including PA6, PA6.6, PA11 and PA12. OnFlex™-S KA can be processed by 2K molding or overmolding, insert molding or co-extrusion. In addition to this, OnFlex™-S KA compounds are formulated to provide excellent compression set performance, even at elevated temperatures, a wide hardness range, good colourability and surface appearance, good mechanical properties and excellent UV resistance.Properties are measured using injection molded plaques.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.09 g/cc	0.0394 lb/in³	ISO 1183
Linear Mold Shrinkage	0.0090 cm/cm @Thickness 2.00 mm, Time 259000 sec	0.0090 in/in @Thickness 0.0787 in, Time 72.0 hour	Across Flow Measured on 100x100x2mm plates, results may vary depending on processing parameters, part geometry and tool design.; Internal Method
	0.029 cm/cm @Thickness 2.00 mm, Time 259000 sec	0.029 in/in @Thickness 0.0787 in, Time 72.0 hour	FlowMeasured on 100x100x2mm plates, results may vary depending on processing parameters, part geometry and tool design.; Internal Method

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	40	40	ISO 868
Tensile Strength at Break	3.00 MPa	435 psi	ISO 37
Tensile Stress	1.00 MPa @Strain 100 %	145 psi @Strain 100 %	ISO 37
	2.30 MPa @Strain 300 %	334 psi @Strain 300 %	ISO 37
Elongation at Break	410 %	410 %	ISO 37
Tear Strength	17.0 kN/m	97.0 pli	ISO 34-1
Compression Set	13 % @Temperature 23.0 °C, Time 259000 sec	13 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	29 % @Temperature 70.0 °C, Time 79200 sec	29 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	57 % @Temperature 100 °C, Time 79200 sec	57 % @Temperature 212 °F, Time 22.0 hour	ISO 815

Processing Properties	Metric	English
Melt Temperature	200 - 260 °C	392 - 500 °F
Mold Temperature	30.0 - 50.0 °C	86.0 - 122 °F
Drying Temperature	100 °C	212 °F
Dry Time	2.00 hour	2.00 hour

Descriptive Properties	Value	Comments
Features	Good Adhesion
	Good UV Resistance
	High Heat Resistance
Forms	Pellets
Generic Material	TPE
Generic Material Type	Styrenic Thermoplastic Elastomer (TES)
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Moderate
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Coextrusion
	Multi Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Consumer Applications
	Industrial Applications
	Overmolding
	Power/Other Tools

Users viewing this material also viewed the following: