PolyMirae Moplen EP300K Injection Molding Grade Polypropylene

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded
Manufacturer	PolyMirae Company Ltd.
Trade Name	Moplen
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyMirae Moplen EP300K Injection Molding Grade Polypropylene.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Moplen EP300K is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP300K is a block copolymer particularly suitable for injection molding of pallet. Moplen EP300K meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520. And the components of additives are adequate on the food packaging substances specification of FDA regulation 21 CFR 178.2010.Features: Very high impact even at low temperature combined with a good stiffness/Optimized balance of stiffness and toughness/Low warpageApplications: E&E/Houseware/CratesInformation provided by PolyMirae Company Ltd.

Physical Properties	Metric	English	Comments
Density	0.900 g/cc	0.0325 lb/in³	ASTM D1505
Melt Flow	4.0 g/10 min @Load 2.16 kg, Temperature 230 °C	4.0 g/10 min @Load 4.76 lb, Temperature 446 °F	Condition L; ASTM D1238

Mechanical Properties	Metric	English	Comments
Flexural Modulus	1.23 GPa	178 ksi	ASTM D790
Izod Impact, Notched	0.490 J/cm @Temperature -20.0 °C	0.918 ft-lb/in @Temperature -4.00 °F
	0.981 J/cm @Temperature 23.0 °C	1.84 ft-lb/in @Temperature 73.4 °F

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	100 °C	212 °F	ASTM D648
Vicat Softening Point	148 °C	298 °F	ASTM D1525

Users viewing this material also viewed the following: