Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

PEAK Werkstoff DISPAL S270 Aluminum Alloy, AlSi25Fe4Ni3CuMgMnCrTi, Condition T6

Category Metal , Nonferrous Metal , Aluminum Alloy
Manufacturer PEAK Werkstoff
Trade Name DISPAL
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF PEAK Werkstoff DISPAL S270 Aluminum Alloy, AlSi25Fe4Ni3CuMgMnCrTi, Condition T6.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational demands.Information provided by PEAK Werkstoff GmbH
Physical Properties Metric English Comments
Density 2.651 - 2.930 g/cc
0.09576 - 0.1058 lb/in³
Mechanical Properties Metric English Comments
Hardness, Vickers >= 200
>= 200
HV30, Condition T6 (Quenching in water at 80)
>= 230
>= 230
HV30, Condition T6 (Quenching in water at RT)
Tensile Strength at Break >= 252 MPa

@Temperature 250 °C
 >= 36500 psi

@Temperature 482 °F
>= 425 MPa

@Temperature 20.0 °C
 >= 61600 psi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at 80C)
>= 480 MPa

@Temperature 20.0 °C
 >= 69600 psi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at RT)
Tensile Strength, Yield >= 373 MPa

@Temperature 20.0 °C
 >= 54100 psi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at 80C)
>= 470 MPa

@Temperature 20.0 °C
 >= 68200 psi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at RT)
Elongation at Break >= 0.15 %

@Temperature 20.0 °C
 >= 0.15 %

@Temperature 68.0 °F
 Condition T6 (Quenching in water at RT)
>= 0.20 %

@Temperature 20.0 °C
 >= 0.20 %

@Temperature 68.0 °F
 Condition T6 (Quenching in water at 80C)
Modulus of Elasticity >= 99.0 GPa

@Temperature 20.0 °C
 >= 14400 ksi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at 80C)
>= 100 GPa

@Temperature 20.0 °C
 >= 14500 ksi

@Temperature 68.0 °F
 Condition T6 (Quenching in water at RT)
Poissons Ratio 0.284

@Temperature 20.0 °C
 0.284

@Temperature 68.0 °F
 Condition F
0.286

@Temperature 100 °C
 0.286

@Temperature 212 °F
 Condition F
0.288

@Temperature 150 °C
 0.288

@Temperature 302 °F
 Condition F
0.289

@Temperature 200 °C
 0.289

@Temperature 392 °F
 Condition F
0.291

@Temperature 250 °C
 0.291

@Temperature 482 °F
 Condition F
0.292

@Temperature 300 °C
 0.292

@Temperature 572 °F
 Condition F
Thermal Properties Metric English Comments
CTE, linear 15.2 - 16.2 µm/m-°C

@Temperature 20.0 - 100 °C
 8.44 - 9.00 µin/in-°F

@Temperature 68.0 - 212 °F
15.7 - 16.7 µm/m-°C

@Temperature 20.0 - 200 °C
 8.72 - 9.28 µin/in-°F

@Temperature 68.0 - 392 °F
16.3 - 17.3 µm/m-°C

@Temperature 20.0 - 300 °C
 9.06 - 9.61 µin/in-°F

@Temperature 68.0 - 572 °F
Specific Heat Capacity 0.800 - 0.840 J/g-°C
0.191 - 0.201 BTU/lb-°F
Thermal Conductivity 89.60 W/m-K

@Temperature 400 °C
 621.8 BTU-in/hr-ft²-°F

@Temperature 752 °F
93.70 W/m-K

@Temperature 300 °C
 650.3 BTU-in/hr-ft²-°F

@Temperature 572 °F
94.90 W/m-K

@Temperature 200 °C
 658.6 BTU-in/hr-ft²-°F

@Temperature 392 °F
96.30 W/m-K

@Temperature 100 °C
 668.3 BTU-in/hr-ft²-°F

@Temperature 212 °F
98.40 W/m-K

@Temperature 30.0 °C
 682.9 BTU-in/hr-ft²-°F

@Temperature 86.0 °F
Melting Point 536 - 777 °C
997 - 1430 °F
Solidus 536.3 - 542.3 °C
997.3 - 1008 °F
Liquidus 770.9 - 776.9 °C
1420 - 1430 °F
Component Elements Properties Metric English Comments
Aluminum, Al 63 %
63 %
As Balance
Chromium, Cr 1.0 %
1.0 %
Copper, Cu 1.0 %
1.0 %
Iron, Fe 4.0 %
4.0 %
Magnesium, Mg 1.0 %
1.0 %
Manganese, Mn 1.0 %
1.0 %
Nickel, Ni 3.0 %
3.0 %
Silicon, Si 25 %
25 %
Titanium, Ti 1.0 %
1.0 %
Electrical Properties Metric English Comments
Electrical Resistivity 0.00000940 - 0.0000104 ohm-cm
0.00000940 - 0.0000104 ohm-cm
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved