- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- Network Polymers NPP 50-2000
Network Polymers NPP 50-2000
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers NPP 50-2000.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Utility Grade High Density Polyethylene (HDPE)Information provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.945 - 0.965 g/cc | 0.0341 - 0.0349 lb/in³ | ASTM D1505 |
| Melt Flow | 6.0 - 27 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.0 - 27 g/10 min @Load 4.76 lb, Temperature 374 °F |
Procedure A Condition E; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 19.3 - 27.6 MPa | 2800 - 4000 psi | ASTM D638 |
| Elongation at Break | 5.0 - 400 % | 5.0 - 400 % | chs 2 in/min; ASTM D638 |
| Flexural Modulus | 0.862 - 1.21 GPa | 125 - 175 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
Users viewing this material also viewed the following:
- Nye Lubricants 368A (NC-GP) (RL) Synthetic Oil
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 80 PHR Dixie Clay Filler
- Lubriplate 730-0 Aluminum Complex Multi-Purpose Grease
- SABIC Innovative Plastics LNP Stat-kon RX08408_NA1D004 PA 66
- Techmer ES Plaslube® J-1/20/MS/5 NAT PA66
- SABIC Innovative Plastics NORYL FXN119BK PPE+HIPS (Europe-Africa-Middle East)
- Chase Plastics CP Pryme® PC300HFR Polycarbonate (Utility Grade), High Flow, Mold Release
- Eastman D4032-F Polyethylene (discontinued **)
- Johnson Matthey JM Tenacity 2 Brazing Flux Powder
Copyright © lookpolymers.com All Rights Reserved