- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Blow Molding Grade
- Network Polymers NPP 50-0252
Network Polymers NPP 50-0252
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers NPP 50-0252.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: High Density Polyethylene (HDPE) Blow Molding GradeInformation provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.952 - 0.955 g/cc | 0.0344 - 0.0345 lb/in³ | ASTM D1505 |
| Linear Mold Shrinkage | 0.015 - 0.050 cm/cm | 0.015 - 0.050 in/in | |
| Melt Flow | 0.25 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.25 g/10 min @Load 4.76 lb, Temperature 374 °F |
Procedure A Condition E; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 26.2 MPa | 3800 psi | 2 in per min; ASTM D638 |
| Elongation at Break | 1200 % | 1200 % | |
| Flexural Modulus | 1.28 GPa | 185 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
| Tensile Impact Strength | 210 kJ/m² | 100 ft-lb/in² | ASTM D1822 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 72.0 °C | 162 °F | ASTM D648 |
| Vicat Softening Point | 127 °C | 261 °F | ASTM D1525 |
| Brittleness Temperature | <= -76.1 °C | <= -105 °F | ASTM D746 |
Users viewing this material also viewed the following:
- Premix Premi-Glas® 3140-22 Fiberglass Reinforced Thermoset Thick Molding Compound
- NOVA Chemicals Surpass® RMs244-U Octene sHDPE Rotational Molding Film
- Gouda Vuurvast CURON 120 LC AL Dense Refractory Castable
- SABIC Innovative Plastics LNP THERMOCOMP EF004 PEI
- A. Schulman POLYBATCH™ White 8153/UV2 Concentrate Based In Polyethylene
- Donnelly Bros HT 500 High Temperature Mold Grease
- EMS-Griltech Grilene® KE 150 CoPES Mono-Component Fusible Adhesive Fiber
- BASF Ultramid® B3WG6 HP BK 23210 30% Glass Filled PA6 (Dry)
- Indium Corp. 3N Commercial Indium Metal
Copyright © lookpolymers.com All Rights Reserved