- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- Network Polymers NPP 25-0803
Network Polymers NPP 25-0803
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers NPP 25-0803.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Copolymer PolypropyleneInformation provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.900 g/cc | 0.0325 lb/in³ | ASTM D792 |
| Melt Flow | 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
Procedure A Condition L; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 85 | 85 | ASTM D785 |
| Tensile Strength, Yield | 23.8 MPa | 3450 psi | 2 in per min; ASTM D638 |
| Elongation at Yield | 14.5 % | 14.5 % | chs 2 in/min; ASTM D638 |
| Flexural Modulus | 1.00 GPa | 145 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | Test Method A (0.125 in bar); ASTM D256 |
| Gardner Impact | 22.6 J @Temperature -30.0 °C |
16.7 ft-lb @Temperature -22.0 °F |
Gardner |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 100 °C | 212 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Pyrotek TS-106 Thermoset Electrical Insulation Product
- 3M Dyneon™ CC105 Custom Fluoropolymer Compound (discontinued **)
- LyondellBasell Plexar® PX1007 Extrudable Tie-Layer Resin - Anhydride Modified EVA
- LG Chemical LUMID GP2309A(W) PA6+GF30%, General Purpose
- Taiwan PU Corporation CPU-69-A/B Mixing Ratio 100/36 Polyurethane Casting Elastomer
- Dow Corning SILASTIC® LSR 9791-70 A&B KIT
- ELASTO UK Dryflex® 502800S SEBS Based Material, Unfilled Qualities, 80A Hardness, Black
- Engineered Plastics EPPC 1514B Polycarbonate
- Dow LDPE 4005M Low Density Polyethylene
- BNZ Materials Blazecrete 3000 G Dense Castable
Copyright © lookpolymers.com All Rights Reserved