NOVA Chemicals Novapol® 20% LF-0718-A in PF-0118-B LDPE Film Resin

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Film Grade
Manufacturer	NOVA Chemicals
Trade Name	Novapol®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	NOVA Chemicals Novapol® 20% LF-0718-A in PF-0118-B LDPE Film Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Improves gloss and reduces haze in blends with LLDPE, Improves melt strength and increases output in blends with LLDPEApplications: Blends with LLDPEAdditives: Base resinFilm properties are typical of blown film extruded at a blowup ratio of 2.5:1, but are dependent upon operating conditions.Information provided by NOVA Chemicals.

Physical Properties	Metric	English	Comments
Density	0.918 g/cc	0.0332 lb/in³	ASTM D792
Melt Flow	7.0 g/10 min @Load 2.16 kg, Temperature 190 °C	7.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	11.0 MPa	1600 psi	ASTM D882
Film Tensile Strength at Yield, TD	12.0 MPa	1740 psi	ASTM D882
Film Elongation at Break, MD	500 %	500 %	ASTM D882
Film Elongation at Break, TD	600 %	600 %	ASTM D882
Secant Modulus, MD	0.180 GPa	26.1 ksi	at 1%; ASTM D882
Secant Modulus, TD	0.240 GPa	34.8 ksi	at 1%; ASTM D882
Impact	50	50	J/mm; NOVA Chemicals Puncture test
Coefficient of Friction	<= 0.20	<= 0.20	ASTM D1894
Elmendorf Tear Strength, MD	1.20 g/micron	30.5 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	15.7 g/micron	399 g/mil	ASTM D1922
Dart Drop	2.20 g/micron	55.9 g/mil	F<sub>50</sub>, ASTM D1709/A
Film Tensile Strength at Break, MD	33.0 MPa	4790 psi	ASTM D882
Film Tensile Strength at Break, TD	22.0 MPa	3190 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	7.0 %	7.0 %	ASTM D1003
Gloss	60 %	60 %	at 45°; ASTM D2457

Descriptive Properties	Value	Comments
Blow Up Ratio	2:1 to 3:1

Users viewing this material also viewed the following: