Formosa Plastics Formolene® 4142N Injection Molding Polypropylene

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded
Manufacturer	Formosa Plastics Corporation, USA
Trade Name	Formolene®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Formosa Plastics Formolene® 4142N Injection Molding Polypropylene.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Homopolymer with Nucleating, Antistat AdditivesApplications: Appliance, closure and thin wall applications.Formolene 4142N is a medium viscosity, highly isotactic polypropylene homopolymer designed primarily for appliance, closure and thin wall applications. It contains a unique combination of stabilizers including nucleators and antistats that give it an excellent balance of stiffness and toughness. Formolene 4142N fills molds easily and sets up quickly.Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.Specimens were injection molded according to the conditions specified in ASTM D4101.Information provided by Formosa Plastics Corporation, USA.

Physical Properties	Metric	English	Comments
Density	0.900 g/cc	0.0325 lb/in³	ASTM D1505
Melt Flow	12 g/10 min @Temperature 230 °C	12 g/10 min @Temperature 446 °F	I<sub>2</sub>; ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	110	110	ASTM D785
Tensile Strength, Yield	40.0 MPa	5800 psi	2" (50mm) per min.; ASTM D638
Elongation at Yield	6.5 %	6.5 %	2" (50mm) per min.; ASTM D638
Flexural Modulus	1.86 GPa	270 ksi	1.3mm per min, 1% secant; ASTM D790
Izod Impact, Notched	0.320 J/cm	0.600 ft-lb/in	ASTM D256

Users viewing this material also viewed the following: