Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Murtfeldt Original Material ”S”® plus + GB Polyethylene, Glass Bead Filled

Category Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Glass fiber Filled , High Density Polyethylene (HDPE), UHMW PE Ultra High Molecular Weight
Manufacturer Murtfeldt Kunststoffe GmbH & Co
Trade Name Original Material ”S”®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Murtfeldt Original Material ”S”® plus + GB Polyethylene, Glass Bead Filled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
The balanced quantity of micro glass beads in Material ”S”® plus+ GB provides the combined benefits of extremely high molecular weight polyethylene and glass. The glass beads that protrude from the surface give a rounded and hard sliding surface. This material is used for applications that involve manufacturing and transportation at high pressure.Special Properties:• Protects the sliding partner• Extremely good resistance to chemicals• Approved for use in the food industry (EU and FDAInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.
Physical Properties Metric English Comments
Density <= 0.940 g/cc
<= 0.0340 lb/in³
ISO 1183
Moisture Absorption at Equilibrium <= 0.010 %
<= 0.010 %
ISO 62
Water Absorption at Saturation <= 0.010 %
<= 0.010 %
ISO 62
Molecular Weight 9.00e+6 g/mol
9.00e+6 g/mol
Mechanical Properties Metric English Comments
Hardness, Shore D 65
65
DIN 53505
Ball Indentation Hardness 44.0 MPa
6380 psi
Tensile Strength at Break >= 29.0 MPa
>= 4210 psi
ISO 527
Tensile Strength 25.0 MPa
3630 psi
ISO 527
Elongation at Break 290 %
290 %
ISO 527
Modulus of Elasticity 0.700 GPa
102 ksi
Compressive Yield Strength 9.50 MPa

@Strain 1.00 %
1380 psi

@Strain 1.00 %
ISO 604
15.0 MPa

@Strain 2.00 %
2180 psi

@Strain 2.00 %
ISO 604
24.0 MPa

@Strain 5.00 %
3480 psi

@Strain 5.00 %
ISO 604
Charpy Impact, Notched >= 10.0 J/cm²
>= 47.6 ft-lb/in²
ISO 179
Coefficient of Friction, Dynamic 0.10 - 0.20
0.10 - 0.20
Sand Slurry 80
80
value in %
Thermal Properties Metric English Comments
CTE, linear 170 µm/m-°C

@Temperature 23.0 - 60.0 °C
94.4 µin/in-°F

@Temperature 73.4 - 140 °F
Thermal Conductivity 0.400 W/m-K
2.78 BTU-in/hr-ft²-°F
ISO 52612
Melting Point 130 - 135 °C
266 - 275 °F
ISO 3146
Maximum Service Temperature, Air 90.0 °C
194 °F
Short Term
80.0 °C

@Time 1.80e+7 sec
176 °F

@Time 5000 hour
Minimum Service Temperature, Air -200 °C
-328 °F
Glass Transition Temp, Tg -120 °C
-184 °F
Flammability, UL94 HB
HB
Electrical Properties Metric English Comments
Electrical Resistivity >= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+13 ohm
>= 1.00e+13 ohm
IEC 60093
Dielectric Strength <= 45.0 kV/mm
<= 1140 kV/in
IEC 60243
Compliance Properties Metric English Comments
FDA Yes
Yes
Descriptive Properties Value Comments
Color Light Green
Copyright © lookpolymers.com All Rights Reserved