Polymer Property : Density = 0.0340 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	<= 0.940 g/cc	<= 0.0340 lb/in³	ISO 1183
Murtfeldt Material ”S”® 1000 Black Antistatic Polyethylene, Conductive Material ”S”® 1000 is exclusively produced from ultra-high molecular weight polyethylene powder that is mixed with finely milled Original Material ”S”®. The fine milled material is compressio..
Density	<= 0.940 g/cc	<= 0.0340 lb/in³	ISO 1183
Murtfeldt Material ”S”® 1000 Green Polyethylene Material ”S”® 1000 is exclusively produced from ultra-high molecular weight polyethylene powder that is mixed with finely milled Original Material ”S”®. The fine milled material is compressio..
Density	0.940 - 0.944 g/cc	0.0340 - 0.0341 lb/in³	Base Resin; ASTM D1505
NIZHNEKAMSKNEFTEKHIM PE 4142L (424F5) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Density	0.942 g/cc	0.0340 lb/in³	ASTM D1505
Reliance Industries Relene S42005 Polyethylene Wire and cable High Density Polyethylene grade. Characteristics: excellent processing, superior physical/electrical properties, good environmental stress crack resistance. Applications: recommended ..
Density	0.940 g/cc	0.0340 lb/in³	ISO 1183-A
Okulen® 1000 - REG PE Multicoloured fine OKULEN® 1000 is an ultra high molecular low pressure polyethylene with a molecular weight of < 3.5 g/mol. It has great wear resistance, high impact strength, and excellent sliding properties ideal ..
Density	0.940 g/cc	0.0340 lb/in³	Finaprene 2602 Test
Total Finaprene® 411x Styrene-Butadiene TPE Copolymer, 80 Shore A (discontinued **) Styrene-Butadiene CopolymerDescription: Finaprene® 411x is a thermoplastic elastomer type radial styrene-butadiene block copolymer. Thanks to its high molecular weight, Finaprene® 411x provides e..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D1505
ICO Polymers ICORENEâ„¢ 155-4060 LMDPE Rotational Molding Resin Description: ICORENE 155-4060 is a linear medium density polyethylene developed for use in rotational molding. It has a great combination of stiffness and toughness in a resin that is easy processi..
Density	0.940 g/cc	0.0340 lb/inÂ³	Not Compounded
KKPC KOSYN 1502 Styrene Butadiene Rubber Styrene Butadiene RubberCharacteristics: KOSYN SBR, a useful synthetic rubber, is a copolymer made from butadiene and styrene by cold emulsion polymerization. It has superior abrasion resistance and..
Density	0.942 g/cc	0.0340 lb/inÂ³	ASTM D 4883
Ineos K38-20X2091 HDPE K38-20X2091 is a yellow medium density polyethylene resin designed specifically for natural gas pipe extrusion. It exhibits excellent long term stress life and slow crack growth resistance. This m..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D792
Micropol Microlin ML25 Linear Polyethylene Rotational Molding Powder Information provided by Micropol Limited
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D792
Multibase Multi-FlexÂ® TPE A 4002 BLK Multi-FlexÂ® A 4002 is based on Shell's Kraton G polymer and is suitable for soft touch applications for the automotive industry. It exhibits excellent paintibility adhesion. Multi-Flex TPE cont..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D792
Teknor Apex SarlinkÂ® 3145D Thermoplastic Elastomer A high hardness, multi-purpose thermoplastic elastomer featuring excellent compression set and high temperature performance. SarlinkÂ® 3145D can be processed by injection blow molding, molding or ..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D1505
Borealis Borecene™ RM7403 Linear Polyethylene for Rotational Molding Borecene Compact RM7403 is a third generation linear medium density black polyethylene for rotational molding. The narrow molecular weight imparted through metallocene catalyst technology provides ..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D1505
Borealis Borecene™ RM8403 Linear Polyethylene for Rotational Molding Borecene RM8403 is a third generation linear medium density natural polyethylene for rotational molding. The narrow molecular weight distribution imparted through metallocene catalyst technology pro..
Density	0.941 g/cc	0.0340 lb/in³	LE 4437; ASTM D792
Borealis Visico™ LE4423/LE4460/LE4437 Scorch Retardant, Moisture-Crosslinking Polyethylene Compound for Low Voltage Installation Visico LE4423/LE4460/LE4437 is a natural, halogen-based, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The combination o..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792 - ISO 1183
DuPont Elvaloy® 4170 Reactive Ethylene Terpolymer (RET) A reactive ethylene terpolymer (RET) that can be used to modify the properties of asphalt binder used in paving.Elvoy® 4170 is the most chemically reactive of the terpolymers manufactured by DuPont..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D1505
Westlake Elevate™ DA528AA Ethylene Vinyl Acetate Copolymer Developmental ProductDescription: Westlake ELEVATE™ DA528 is an ethylene vinyl acetate copolymer with 18.5% VA. DA528 is designed for blown and cast films requiring excellent optics and low heat s..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont™ Bynel® 22E780 Modified Ethylene Acrylate BYNEL® Series 2200 resins are modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet f..
Density	0.940 g/cc	0.0340 lb/in³	ISO 1183
ExxonMobil Exxtral™ LNU 012 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin with good heat resistance and good surface finish designed for fast injection molding of large electrical appliance parts.Availability..
Density	0.940 g/cc	0.0340 lb/in³	ISO 1183
Eurostar Starflam M10009XP PP, Flame Retardant, Injection Molding Starflam M10009XP is an Unfilled Flame Retardant Polypropylene (Copolymer) Injection Molding ResinInformation provided by Eurostar.
Density	0.940 g/cc @Temperature 23.0 °C	0.0340 lb/in³ @Temperature 73.4 °F	ISO 1183
Arkema Group LOTADER® 3430 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 3430 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 3430 is a versatile adhesive for extrusion coating or lam..
Density	0.940 g/cc @Temperature 23.0 °C	0.0340 lb/in³ @Temperature 73.4 °F	ISO 1183
Arkema Group LOTADER® 4210 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 4210 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 4210 is a versatile adhesive for extrusion coating or lam..
Density	0.940 g/cc @Temperature 23.0 °C	0.0340 lb/in³ @Temperature 73.4 °F	ISO 1183
Arkema Group LOTADER® 4720 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 4720 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized under high pressure in an autoclave process. Comonomer content is high. Due to its properties (reacti..
Density	0.940 g/cc @Temperature 23.0 °C	0.0340 lb/in³ @Temperature 73.4 °F	ISO 1183
Arkema Group EVATANE® 24-03 Copolymer Ethylene - Vinyl Acetate EVATANE® 24-03 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicalar polymerisation process. EVATANE® 24-03 is stabilized with antioxidants. The High Vinyl Acetate co..
Density	0.942 g/cc	0.0340 lb/in³	ASTM D4883
ExxonMobil Escorene® HD-8661 HDPE, Rotational Molding Powder (discontinued **) Data Provided by Exxon Chemical Canada.Characteristics: Fully formulated UV-8 type protection, Higher stiffness & impact strengthUses: Large agricultural tanks, Industrial products
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont™ Fusabond® M603 Polymer Modifier Fusabond® M603 Resin is a random ethylene copolymer, incorporating a monomer which is classified as being a maleic anhydride equivalent for application uses.Fusabond® M603 is used in a variety of ..
Density	0.940 g/cc	0.0340 lb/in³	Estimated by MatWeb
DuPont™ Surlyn® 1802 Sodium Ionomer Resin for Blown/Cast Film and Extrusion Coating Surlyn® 1802 is an ionomer resin available for use in conventional blown and cast film extrusion and coextrusion equipment and extrusion coating and coextrusion coating equipment designed to proces..
Density	0.941 g/cc	0.0340 lb/in³	ExxonMobil Method
ExxonMobil POLYBILT™ PB 152 Bitumen Modifier Resin (discontinued **) Polybilt PB 152 is an 18% VA copolymer that yields modified bitumen blends with good storage stability, increased softening point, increased high temperature viscosity and decreased penetration. PB ..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
Teknor Apex Sarlink® 3150 Thermoplastic Elastomer A low hardness, multi-purpose thermoplastic elastomer featuring excellent compression set and high temperature performance. Sarlink® 3150 can be processed by injection molding or extrusion for appl..