- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE G 7890 BLK
Multibase Multi-Flex® TPE G 7890 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE G 7890 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Melt Flow | 4.0 - 8.0 g/10 min | 4.0 - 8.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 | 55 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 17.2 MPa | >= 2490 psi | ASTM D412 |
| Elongation at Break | >= 600 % | >= 600 % | ASTM D412 |
| Flexural Modulus | 0.480 GPa | 69.6 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 87.6 kN/m | >= 500 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Multibase Multi-Pro® 3010 X Black Polypropylene
- DuPont™ Nomex® 419 Paper, 13 mil Nominal Thickness
- China Tungsten YG20C Tungsten Carbide for Dies and Wear Part Making
- China Tungsten YT14 Tungsten Carbide for Cutting Tools
- Axiall 53061A Moldings & Extrusions Flexible PVC
- Arkema Group Rilsan® Fine Powders Polyamide 11
- Arlon 0.020" (0.508 mm) Flexible Heater Silicone with Fiberglass Substrate (51586R020)
- C.O.I.M. DIEXTER® G200 Polyol Polyester
- Ametek AM 388™ Alloy (UNS C72650) TM08
- Lanxess Pocan® B 700 000000 PBT (discontinued **)
Copyright © lookpolymers.com All Rights Reserved