- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 5703 BLK
Multibase Multi-Flex® TPE A 5703 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 5703 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.017 cm/cm | 0.017 in/in | ASTM D955 |
| Melt Flow | 1.0 - 5.0 g/10 min | 1.0 - 5.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 55 | 55 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D412 |
| Elongation at Break | >= 700 % | >= 700 % | ASTM D412 |
| Tear Strength | >= 30.0 kN/m | >= 171 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Nye Lubricants 723MS (RL) Rheolube Grease
- Nilit FRIANYL A63 EO Raw extruded nylon 6.6 for injection molding
- Nilit FRIANYL A63 HS-GV30 Nylon 6.6 for injection molding, 30% glass fiber reinforced
- Silberline Aquavexâ„¢ E5000-AR-207S
- DuPont Teijin Films Teijin® Tetoron® HSL Polyester Film, 740 Gauge
- EMS-Grivory Grivory® HT1V-45 HY black 9205 PA6T/6I-GF45
- Abatron AboCast 8502-7/AboCure 8502-7 Colorless, Low-Exotherm Epoxy Casting Compound
- Hexcel® HexWeb® CRF-3/4-ACG-.003-1.8 Chromate free ACG® Honeycomb
Copyright © lookpolymers.com All Rights Reserved