- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Momentive Performance Materials RTV6808 Translucent Industrial Plastic Adhesive/Sealant
Momentive Performance Materials RTV6808 Translucent Industrial Plastic Adhesive/Sealant
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV6808 Translucent Industrial Plastic Adhesive/Sealant.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Primerless adhesion to many metals and plastics including polycarbonate for assembly bonding and sealing.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 18 | 18 | |
| Tensile Strength, Ultimate | 1.67 MPa | 242 psi | |
| Elongation at Break | 400 % | 400 % | |
| Adhesive Bond Strength | 0.830 MPa | 120 psi | Typical lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 205 °C | 401 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 2.8 @Frequency 100 Hz |
2.8 @Frequency 100 Hz |
|
| Dielectric Strength | 19.5 kV/mm | 495 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F |
Users viewing this material also viewed the following:
- Park Electrochemical Nelco® N7000-1 Polyimide Laminate and Prepreg
- G-9 Fiberglass Melamine Laminate Sheet
- A. Schulman POLYTROPE™ TPP 518 Injection Grade Olefinic Thermoplastic Elastomer
- ExxonMobil Metallyte™ 18MM348 OPP Film
- Barlog Plastics KEBATRON C2065X3 PPS, cross-linked, 65% glass fiber / mineral reinforced, reduced residual chlorine
- Ametek High Purity Nickel Strip 899A Hard
- Bhansali Engineering Abstron PT-45M ABS Antistatic Extrusion Grade
- Nyco ULTRAFIBRE® M20 Wollastonite
- Polyram PlusTek RA320G5 Nylon 66 for Injection Molding, 25% Glass-Fiber Reinforced, Flame Retardant and High Stiffness
Copyright © lookpolymers.com All Rights Reserved