- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Encapsulation Grade
- Momentive Performance Materials RTV11 White General Purpose Potting/Encapsulating Compound
Momentive Performance Materials RTV11 White General Purpose Potting/Encapsulating Compound
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone, RTV, Encapsulation Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV11 White General Purpose Potting/Encapsulating Compound.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough materials, highly resistant to contamination, and will not be affected by other chemicals during cure or after. Typical uses: Medical molds/instruments. High voltage power supply potting. General purpose electrical potting.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in³ | |
| Viscosity | 11000 cP @Temperature 25.0 °C |
11000 cP @Temperature 77.0 °F |
|
| Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 41 | 41 | |
| Tensile Strength, Ultimate | 2.06 MPa | 299 psi | |
| Elongation at Break | 160 % | 160 % | |
| Tear Strength | 3.50 kN/m | 20.0 pli | Die B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 250 µm/m-°C @Temperature 20.0 °C |
139 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 204 °C | 399 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -54.0 °C | -65.2 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.10e+15 ohm-cm | 1.10e+15 ohm-cm | |
| Dielectric Constant | 3.3 @Frequency 1000 Hz |
3.3 @Frequency 1000 Hz |
|
| Dielectric Strength | 20.3 kV/mm @Thickness 1.91 mm |
516 kV/in @Thickness 0.0750 in |
|
| Dissipation Factor | 0.0060 @Frequency 1000 Hz |
0.0060 @Frequency 1000 Hz |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F | Cure time 24 hrs. |
| Pot Life | 90.0 min @Temperature 25.0 °C |
90.0 min @Temperature 77.0 °F |
Users viewing this material also viewed the following:
- RheTech Products G13P100-01 13% Glass Fiber Reinforced Polypropylene, Black
- DuPont Bynel® 3095 Anhydride-Modified Ethylene Vinyl Acetate Adhesive Resin (discontinued **)
- Covestro Apec® DP9-9341 High-Heat Polycarbonate, General Purpose (discontinued **)
- Ineos ABS Lustran® 720 ABS, Molding Grade
- H.C. Starck Pure Molybdenum Plate, PP-22-2
- Taiwan Sheen Soon Sheenthane® A8630F Thermoplastic Polyurethane Elastomer
- SABIC Innovative Plastics LNP Thermocomp C7410 PC+ABS (Asia Pacific)
- Shinkong Synthetic Fibers Shinite® D201K008 PBT, High Viscosity
- Eagle Brass 725 Copper Nickel Tin, Spring
- 3M FM0139 Indoor UL Recognized Clear Polyester Overlaminate Label Product
Copyright © lookpolymers.com All Rights Reserved