- HOME
- POLYMER SEARCH
- Heat Resisting
- MetalTek MTEK 27-5 Cast UNS J93015 Heat Resistant Stainless Steel
MetalTek MTEK 27-5 Cast UNS J93015 Heat Resistant Stainless Steel
| Category | Metal , Ferrous Metal , Heat Resisting , Stainless Steel , Cast Stainless Steel |
| Manufacturer | MetalTek |
| Trade Name | MTEK |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | MetalTek MTEK 27-5 Cast UNS J93015 Heat Resistant Stainless Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Higher nickel yields improved strength. Resists high sulfur process gas.Applications: Pour spouts, holding pots, kiln parts, gas parts.Information provided by MetalTek
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Brinell | 192 | 192 | |
| Tensile Strength, Ultimate | >= 515 MPa | >= 74700 psi | |
| Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
| Elongation at Break | >= 8.0 % | >= 8.0 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 700 °C | 1290 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.50 % | <= 0.50 % | |
| Chromium, Cr | 26 - 30 % | 26 - 30 % | |
| Iron, Fe | 59 - 70 % | 59 - 70 % | As Balance |
| Manganese, Mn | <= 1.5 % | <= 1.5 % | |
| Nickel, Ni | 4.0 - 7.0 % | 4.0 - 7.0 % | |
| Silicon, Si | <= 2.0 % | <= 2.0 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Heat Treatment | Not Heat Treated |
Users viewing this material also viewed the following:
- Oxford Polymers 15GF 15% Glass Fiber Reinforced Polybutylene Terephthalate (PBT)
- LyondellBasell Montell 1900CM UHMW Polyethylene
- LG Chemical AF-348 ABS, Flame Retardant, Heat Resistant, Weather Resistant
- Michelman® ThermaGloss® 420 Water based over print varnish
- Schott NG4 Neutral Density Filter
- Techmer ES Elastoblend® PA6 IM 407 L
- Diamond Polymers ASA S190
- Chevron Phillips Marlex® 9519H High Density Polyethylene, Blow Molding
- Arlon 51588R019 0.019" (0.483 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Von Roll Isola IMI Varnish 707 Solventless Polyester Varnish for Electrical Insulation
Copyright © lookpolymers.com All Rights Reserved