- HOME
- POLYMER SEARCH
- Thermoplastic
- Acrylic (PMMA)
- Lucite International SW Sanitary Ware Acrylic Sheet
Lucite International SW Sanitary Ware Acrylic Sheet
| Category | Polymer , Thermoplastic , Acrylic (PMMA) |
| Manufacturer | Lucite International |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lucite International SW Sanitary Ware Acrylic Sheet.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Lucite® SW complies with ISO 7823-1 and EN 263. It is approved by the French ARNOR "NF" quality mark.Information provided by Lucite International
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 g/cc | 0.0434 lb/in³ | ISO 1183/A |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 98 | 98 | ISO 2039-2 |
| Tensile Strength | 70.0 MPa | 10200 psi | ISO R527, 5 mm/min |
| Tensile Modulus | 3.20 GPa | 464 ksi | ISO R527, 5 mm/min |
| Flexural Strength | 120 MPa | 17400 psi | ISO 178, 2 mm/min |
| Charpy Impact Unnotched | 1.20 J/cm² | 5.71 ft-lb/in² | ISO 179/1D |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 77.0 µm/m-°C @Temperature 0.000 - 50.0 °C |
42.8 µin/in-°F @Temperature 32.0 - 122 °F |
DIN 5372 |
| Specific Heat Capacity | 1.46 J/g-°C | 0.349 BTU/lb-°F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 98.0 °C | 208 °F | ISO 75 Method A |
| Vicat Softening Point | 105 °C | 221 °F | BS2782: 120 C |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 150 - 170 °C | 302 - 338 °F | optimum shaping temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color Fastness | Hot Water - Grey Scale; EN 263 | |
| UV - Grey Scale; ISO 4892-2 | ||
| Water Absorption (mg) | 29 | 50 mm<sup>2</sup> sample, ISO 62/1 |
Users viewing this material also viewed the following:
- Pyrotek Pyrite N-17 Refractory Board
- Polykemi AB SCANMID 6 B32^ EF F15 Nylon 6, Glass Fiber Reinforced, Modified
- Lord Adhesives 459T Toluene Adhesion Promoter for Lord Acrylic, Epoxy, Urethane and Cyanoacrylate Adhesives
- A. Schulman PP 1227E-01 Polypropylene High-Impact Polypropylene
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber, 0.20 PHR Caytur 4
- ExxonMobil Exxtral™ MDK340 Performance Polyolefin
- BASF Lupranate® MP102 Isocyanate Modified MDI
- Teknor Apex APEX® 3065-H Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved