Lubrizol ESTANE® 58244 Ether Based Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol ESTANE® 58244 Ether Based Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Features: Non-Halogenated flame retardant compoundUses: Extrusion – wire and cable and general extrusion where flame retardant propertied are requiredAvailable in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.

Physical Properties	Metric	English	Comments
Specific Gravity	1.19 g/cc	1.19 g/cc	ASTM D792
Loss On Ignition	28 %	28 %	ASTM D2863
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	87 - 93 @Time 5.00 sec	87 - 93 @Time 0.00139 hour	ASTM D2240
Tensile Strength	13.8 MPa	2000 psi	ASTM D412
Elongation at Break	640 %	640 %	ASTM D412
100% Modulus	0.00690 GPa	1.00 ksi	ASTM D412
300% Modulus	0.00760 GPa	1.10 ksi	ASTM D412
Tear Strength	193 kN/m	1100 pli	Trouser; ASTM D470
Graves Tear Strength	175 kN/m	1000 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	350	350	H18, 1000g; ASTM D3389

Thermal Properties	Metric	English	Comments
Flammability, UL94	V-0	V-0

Processing Properties	Metric	English	Comments
Zone 1	182 °C	360 °F	Extrusion
Zone 2	188 °C	370 °F	Extrusion
Zone 3	194 °C	381 °F	Extrusion
Zone 4	196 °C	385 °F	Extrusion
Adapter Temperature	196 °C	385 °F	Extrusion
Die Temperature	188 °C	370 °F	Zone 2, Extrusion
	194 °C	381 °F	Zone 1, Extrusion
Drying Temperature	104 °C	219 °F
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour
Dew Point	-40.0 °C	-40.0 °F

Descriptive Properties	Value	Comments
Smoke Index	24	NES 711

Users viewing this material also viewed the following: