- HOME
- POLYMER SEARCH
- Martensitic
- Latrobe LSSâ„¢ 420 HC High Carbon Stainless Steel
Latrobe LSSâ„¢ 420 HC High Carbon Stainless Steel
| Category | Metal , Ferrous Metal , Martensitic , Stainless Steel |
| Manufacturer | Latrobe Steel |
| Trade Name | LSS™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Latrobe LSSâ„¢ 420 HC High Carbon Stainless Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
TLS 420 HC is a high-carbon martensitic stainless steel which exhibits an attainable hardness of approximately 55 HRC and good wear resistance. TLS 420 HC should be considered for applications such as specialty knives, industrial knives, cutlery, rolls, plastic extrusion tooling, scissors, surgical knives, bearings, and other applications which require a combination of corrosion resistance and wear resistance.Information Provided by Timken Latrobe Steel.Timken sold Latrobe in December 2006. They are now Latrobe Specialty Steels Co.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 7.70 g/cc | 7.70 g/cc | |
| Density | 7.70 g/cc | 0.278 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell C | 54 | 54 | Air Cooled from 982°C, 30 minutes |
| 56 | 56 | Air Cooled from 1010°C, 30 minutes | |
| 57 | 57 | Air Cooled from 1025°C, 30 minutes | |
| Modulus of Elasticity | 207 GPa | 30000 ksi | |
| Machinability | 50 - 55 % | 50 - 55 % | 1% Carbon Steel |
| Izod Impact Unnotched | 13.6 J | 10.0 ft-lb | Air Cooled from 1010°C; 393°C Temper Temperature |
| 20.3 J | 15.0 ft-lb | Air Cooled from 1010°C; 593°C Temper Temperature |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 10.5 µm/m-°C @Temperature 20.0 - 100 °C |
5.83 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 12.0 µm/m-°C @Temperature 20.0 - 500 °C |
6.67 µin/in-°F @Temperature 68.0 - 932 °F |
||
| Thermal Conductivity | 30.0 W/m-K @Temperature 20.0 °C |
208 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
|
| 31.11 W/m-K @Temperature 199 °C |
215.9 BTU-in/hr-ft²-°F @Temperature 390 °F |
||
| 32.44 W/m-K @Temperature 399 °C |
225.1 BTU-in/hr-ft²-°F @Temperature 750 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | 0.46 % | 0.46 % | |
| Chromium, Cr | 13 % | 13 % | |
| Iron, Fe | 85.44 % | 85.44 % | |
| Manganese, Mn | 0.40 % | 0.40 % | |
| Silicon, Si | 0.40 % | 0.40 % | |
| Vanadium, V | 0.30 % | 0.30 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 0.0000548 ohm-cm | 0.0000548 ohm-cm |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Critical Temperature | 799 °C | 1470 °F | Ac1 |
| 860 °C | 1580 °F | Ac3 |
Users viewing this material also viewed the following:
- Palm Labs Adhesives TURBO FUSE SERIES 130 LOW ODOR/LOW BLOOM (100 Viscosity) Rapid Bonding Adhesive
- Gromax BFG45-B100N1 Nylon 6 46% Glass Filled (Dry)
- Solvay Specialty Polymers Amodel® A-1145 DW Polyphthalamide (PPA), 45% Glass Fiber
- Sharadaa Ceramics LI 50K High Alumina Brick
- Daikin DAI-EL LT-302 Fluoroelastomer, Low Temperature Grade, 64% Fluorine Content
- EMS-Grivory Grivory® XE 4104 nat PA610-GF40
- DuPont Teijin Films Mylar® OB12AF Polyester Packaging Film, 150 Gauge
- Braskem H 504 XP Bioriented Film Polypropylene
- 3M Dyneon™ RC 5251Q Elastomer Additive
- A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved