Lanxess DurethanÂ® DP 2131/20 W1 901317 Nylon 6, 20% Glass Fiber

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 20% Glass Fiber Filled
Manufacturer	Lanxess
Trade Name	Durethan®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lanxess DurethanÂ® DP 2131/20 W1 901317 Nylon 6, 20% Glass Fiber.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

PA 6, injection molding grade, 20% glass fibers, better surface finish and resistance to alcoholic calcium chloride-solution than BKV 20 H2.0, weather resistance, good heat-ageing resistance

Physical Properties	Metric	English	Comments
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
Viscosity Test	140 cmÂ³/g	140 cmÂ³/g	Viscosity number; ISO 307, 1157, 1628
Melt Flow	28 g/10 min @Load 5.00 kg, Temperature 270 Â°C	28 g/10 min @Load 11.0 lb, Temperature 518 Â°F	Estimated using room temperature density; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	100 MPa	14500 psi	Conditioned; ISO 527-1/-2
	150 MPa	21800 psi	ISO 527-1/-2
Elongation at Break	3.0 %	3.0 %	ISO 527-1/-2
	7.0 %	7.0 %	Conditioned; ISO 527-1/-2
Tensile Modulus	4.70 GPa	682 ksi	Conditioned; ISO 527-1/-2
	7.60 GPa	1100 ksi	ISO 527-1/-2
Charpy Impact Unnotched	4.00 J/cmÂ² @Temperature -30.0 Â°C	19.0 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eU
	4.00 J/cmÂ² @Temperature -30.0 Â°C	19.0 ft-lb/inÂ² @Temperature -22.0 Â°F	Conditioned; ISO 179/1eU
	4.50 J/cmÂ² @Temperature 23.0 Â°C	21.4 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eU
	6.00 J/cmÂ² @Temperature 23.0 Â°C	28.6 ft-lb/inÂ² @Temperature 73.4 Â°F	Conditioned; ISO 179/1eU
Charpy Impact, Notched	0.600 J/cmÂ² @Temperature -30.0 Â°C	2.86 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eA
	0.700 J/cmÂ² @Temperature 23.0 Â°C	3.33 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA
Puncture Energy	5.00 J	3.69 ft-lb	ISO 6603-2
	10.0 J	7.38 ft-lb	Conditioned; ISO 6603-2
	4.00 J @Temperature -30.0 Â°C	2.95 ft-lb @Temperature -22.0 Â°F	ISO 6603-2
	4.00 J @Temperature -30.0 Â°C	2.95 ft-lb @Temperature -22.0 Â°F	Conditioned; ISO 6603-2

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	23.0 Âµm/m-Â°C	12.8 Âµin/in-Â°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	89.0 Âµm/m-Â°C	49.4 Âµin/in-Â°F	ISO 11359-1/-2
Melting Point	222 Â°C	432 Â°F	10Â°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	213 Â°C	415 Â°F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	215 Â°C	419 Â°F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	73.0 Â°C	163 Â°F	ISO 75-1/-2
Flammability, UL94	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	IEC 60695-11-10
	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	Conditioned; IEC 60093
	3.00e+15 ohm-cm	3.00e+15 ohm-cm	IEC 60093
Surface Resistance	2.00e+13 ohm	2.00e+13 ohm	IEC 60093
Dielectric Constant	3.74 @Frequency 1.00e+6 Hz	3.74 @Frequency 1.00e+6 Hz	IEC 60250
	4.1 @Frequency 100 Hz	4.1 @Frequency 100 Hz	IEC 60250
	4.27 @Frequency 1.00e+6 Hz	4.27 @Frequency 1.00e+6 Hz	Conditioned; IEC 60250
	9.34 @Frequency 100 Hz	9.34 @Frequency 100 Hz	Conditioned; IEC 60250
Dissipation Factor	0.0087 @Frequency 100 Hz	0.0087 @Frequency 100 Hz	IEC 60250
	0.0185 @Frequency 1.00e+6 Hz	0.0185 @Frequency 1.00e+6 Hz	IEC 60250
	0.0677 @Frequency 1.00e+6 Hz	0.0677 @Frequency 1.00e+6 Hz	Conditioned; IEC 60250
	0.2203 @Frequency 100 Hz	0.2203 @Frequency 100 Hz	Conditioned; IEC 60250

Descriptive Properties	Value	Comments
Additives	Release agent
Features	Heat stabilized or stable to heat
	U.V. stabilized or stable to weather
Form	Pellets
ISO Shortname	ISO 1874-PA 6,MHLR,14-070,GF20
Processing	Injection molding
Region	Asia Pacific
	Europe
	Near East/Africa
	North America
	South and Central America

Users viewing this material also viewed the following: