POLYMER SEARCH

LG Chemical LUMIPLAS LD590 Light diffusion ABS

Category	Polymer , Thermoplastic , ABS Polymer
Manufacturer	LG Chemical
Trade Name	LUMIPLAS
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical LUMIPLAS LD590 Light diffusion ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Injection Molding, Light diffusion, Medium ImpactApplication: (LED) Lamp Cover, Signboard Lighting Decoration of Electronic DeviceCAS No. 9010-94-0Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.12 g/cc	1.12 g/cc	ASTM D792
Maximum Moisture Content	0.010	0.010	Injection Molding
Linear Mold Shrinkage, Flow	0.0040 - 0.0070 cm/cm @Thickness 3.20 mm	0.0040 - 0.0070 in/in @Thickness 0.126 in	ASTM D955
Melt Flow	9.0 g/10 min @Load 10.0 kg, Temperature 220 Â°C	9.0 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	115	115	ASTM D785
Tensile Strength, Yield	53.9 MPa @Thickness 3.20 mm	7820 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	20 % @Thickness 3.20 mm	20 % @Thickness 0.126 in	50mm/min; ASTM D638
Flexural Yield Strength	88.3 MPa @Thickness 3.20 mm	12800 psi @Thickness 0.126 in	15mm/min; ASTM D790
Flexural Modulus	2.75 GPa @Thickness 3.20 mm	398 ksi @Thickness 0.126 in	15mm/min; ASTM D790
Izod Impact, Notched	0.588 J/cm @Thickness 6.40 mm, Temperature 23.0 Â°C	1.10 ft-lb/in @Thickness 0.252 in, Temperature 73.4 Â°F	ASTM D256
	0.637 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	1.19 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	8.40 Âµm/m-Â°C	4.67 Âµin/in-Â°F	ASTM D696
Deflection Temperature at 1.8 MPa (264 psi)	84.0 Â°C @Thickness 6.40 mm	183 Â°F @Thickness 0.252 in	ASTM D648
UL RTI, Electrical	50.0 Â°C	122 Â°F
UL RTI, Mechanical with Impact	50.0 Â°C	122 Â°F
UL RTI, Mechanical without Impact	50.0 Â°C	122 Â°F
Flammability, UL94	HB @Thickness >=1.50 mm	HB @Thickness >=0.0591 in
	HB @Thickness >=3.00 mm	HB @Thickness >=0.118 in

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	190 - 210 Â°C	374 - 410 Â°F	Injection Molding
Middle Barrel Temperature	200 - 220 Â°C	392 - 428 Â°F	Injection Molding
Front Barrel Temperature	220 - 250 Â°C	428 - 482 Â°F	Injection Molding
Nozzle Temperature	230 - 250 Â°C	446 - 482 Â°F	Injection Molding
Melt Temperature	230 - 250 Â°C	446 - 482 Â°F	Injection Molding
Mold Temperature	40.0 - 60.0 Â°C	104 - 140 Â°F	Injection Molding
Drying Temperature	70.0 - 80.0 Â°C	158 - 176 Â°F	Injection Molding
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour	Injection Molding
Back Pressure	0.981 - 1.96 MPa	142 - 284 psi	Injection Molding
Screw Speed	30 - 60 rpm	30 - 60 rpm	Injection Molding

Users viewing this material also viewed the following: