POLYMER SEARCH

LG Chemical KEYFLEX BT 3140D Ester Type TPE

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyester, TP , Polyester Thermoplastic Elastomer
Manufacturer	LG Chemical
Trade Name	KEYFLEX
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical KEYFLEX BT 3140D Ester Type TPE.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Injection Molding, TPC-ET, Specialty, Low Melting Temperature, Low ModulusApplication: Masterbatch Carrier, Cable Compound BaseCAS: 37282-12-5Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.16 g/cc	1.16 g/cc	ASTM D792
Molecular Weight	458.458 g/mol	458.458 g/mol
Maximum Moisture Content	0.010	0.010	Injection Molding
	0.010	0.010	Extrusion Molding
Melt Flow	8.0 g/10 min @Load 2.16 kg, Temperature 230 Â°C	8.0 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	90	90	ASTM D2240
Hardness, Shore D	36	36	ASTM D2240
Tensile Strength at Break	29.1 MPa @Thickness 2.00 mm	4220 psi @Thickness 0.0787 in	50mm/min; ASTM D638
Elongation at Break	700 % @Thickness 2.00 mm	700 % @Thickness 0.0787 in	50mm/min; ASTM D638
Flexural Modulus	0.0539 GPa @Thickness 6.40 mm	7.82 ksi @Thickness 0.252 in	15mm/min; ASTM D790
Izod Impact, Notched	NB @Thickness 6.40 mm, Temperature 23.0 Â°C	NB @Thickness 0.252 in, Temperature 73.4 Â°F	ASTM D256
	NB @Thickness 6.40 mm, Temperature -40.0 Â°C	NB @Thickness 0.252 in, Temperature -40.0 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	150 Â°C	302 Â°F	Peak
Boiling Point	140 - 230 Â°C	284 - 446 Â°F
Flash Point	300 - 340 Â°C	572 - 644 Â°F

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	ASTM D257
Dielectric Strength	26.0 kV/mm @Thickness 1.00 mm	660 kV/in @Thickness 0.0394 in	ASTM D149
Comparative Tracking Index	600 V	600 V	Solution A; IEC 60112

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	160 - 180 Â°C	320 - 356 Â°F	Injection Molding
Middle Barrel Temperature	170 - 190 Â°C	338 - 374 Â°F	Injection Molding
Front Barrel Temperature	180 - 200 Â°C	356 - 392 Â°F	Injection Molding
Nozzle Temperature	180 - 200 Â°C	356 - 392 Â°F	Injection Molding
Zone 1	160 - 180 Â°C	320 - 356 Â°F	Extrusion Molding
Zone 2	170 - 190 Â°C	338 - 374 Â°F	Extrusion Molding
Zone 3	180 - 200 Â°C	356 - 392 Â°F	Extrusion Molding
Zone 4	180 - 200 Â°C	356 - 392 Â°F	Extrusion Molding
Adapter Temperature	180 - 200 Â°C	356 - 392 Â°F	Extrusion Molding
Die Temperature	170 - 210 Â°C	338 - 410 Â°F	Extrusion Molding
Melt Temperature	150 - 200 Â°C	302 - 392 Â°F	Injection Molding
	150 - 200 Â°C	302 - 392 Â°F	Extrusion Molding
Mold Temperature	10.0 - 35.0 Â°C	50.0 - 95.0 Â°F	Injection Molding
Drying Temperature	80.0 - 90.0 Â°C	176 - 194 Â°F	Injection Molding
	80.0 - 90.0 Â°C	176 - 194 Â°F	Extrusion Molding
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour	Injection Molding
	3.00 - 4.00 hour	3.00 - 4.00 hour	Extrusion Molding

Users viewing this material also viewed the following: