- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Kolon KOPEL® KP3340 General Purpose TPE Resin
Kolon KOPEL® KP3340 General Purpose TPE Resin
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Kolon |
| Trade Name | KOPEL® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon KOPEL® KP3340 General Purpose TPE Resin.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KOPEL® is a thermoplastic polyester elastomer which is a new engineering rubber having combined properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very similar to rubber, but its processability is much superior to rubber. While its flexibility and elastic recovery are similar to rubber, its mechanical properties-heat resistance, weather resistance and UV stability-are far greater than the performance of rubber.Excellent flexibility and creep resistance, good mechanical properties and heat stability, good chemical resistanceInformation provided by US distributor, API-Kolon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | DIN 53479; ASTM D792 |
| Water Absorption | 0.70 % | 0.70 % | DIN 53475; ASTM D570 |
| Linear Mold Shrinkage | 0.010 - 0.012 cm/cm | 0.010 - 0.012 in/in | ASTM D955 |
| Melt Flow | 12 g/10 min @Temperature 190 °C |
12 g/10 min @Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 40 | 40 | DIN 53505; ASTM D2240 |
| Tensile Strength, Ultimate | 24.5 MPa | 3560 psi | DIN 53455; ASTM D638 |
| Elongation at Break | 850 % | 850 % | DIN 53455; ASTM D638 |
| Flexural Yield Strength | 49.0 MPa | 7110 psi | DIN 53455; ASTM D790 |
| Resilience | 67 | 67 | |
| Izod Impact, Notched | NB | NB | DIN 53453; ASTM D256 |
| NB | NB | Low Temp | |
| Taber Abrasion, mg/1000 Cycles | 3.0 | 3.0 | CS-17 WHEEL; ASTM D1044 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 65.0 °C | 149 °F | DIN 53461; ASTM D648 |
| Brittleness Temperature | <= -70.0 °C | <= -94.0 °F | Solenoid Brittle Point; ASTM D746 |
| Flammability, UL94 | HB | HB | measured in KOLON R&D Center |
Users viewing this material also viewed the following:
- Premix Thermoplastics PRE-ELEC® TPE 1501 Conductive Thermoplastic Compound
- Reliance Industries Repol H020SU Polypropylene
- DuPont Performance Polymers Sorona® 3015GV NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**)
- Multibase Multi-Flex® A 4001 LCS Black TPE Thermoplastic Elastomer
- SABIC Innovative Plastics Xenoy® 1760T PBT+PC (Europe-Africa-Middle East)
- Sumitomo Bakelite North America 2008A Glass Reinforced Hardware Grade Epoxy
- Hexcel® HexPly® M26/M26T 120°C (250°F) Curing Epoxy Matrix, M26T/50%/7581 Glass Fabric
- Loctite® 496 General Purpose Methyl Cyanoacrylate Bonding Adhesive
- Arkema Group Orgalloy® LE 60THM Flexible Nylon Alloy (Conditioned)
- Momentive Performance Materials PolarTherm® PT370 Boron Nitride (BN) Powder
Copyright © lookpolymers.com All Rights Reserved