- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 20% Glass Fiber Filled
- Kolon KOPA® KN133G15 G/F Reinforced Nylon 6
Kolon KOPA® KN133G15 G/F Reinforced Nylon 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 20% Glass Fiber Filled |
| Manufacturer | Kolon |
| Trade Name | Kopa® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon KOPA® KN133G15 G/F Reinforced Nylon 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in automobile and industrial parts.Good mechanical properties, outstanding self-lubrication and abrasion resistance, excellent chemical resistance, wide usage temperature, good impact absorbing characteristicsInformation provided by US distributor, API-Kolon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.24 g/cc | 0.0448 lb/in³ | DIN 53479; ASTM D792 |
| Water Absorption | 0.40 % | 0.40 % | DIN 53475; ASTM D570 |
| Linear Mold Shrinkage | 0.0070 - 0.010 cm/cm | 0.0070 - 0.010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | DIN 53505; ASTM D785 |
| Tensile Strength, Ultimate | 137 MPa | 19900 psi | DIN 53455; ASTM D638 |
| Elongation at Break | 7.0 % | 7.0 % | DIN 53455; ASTM D638 |
| Flexural Yield Strength | 186 MPa | 27000 psi | DIN 53455; ASTM D790 |
| Flexural Modulus | 4.90 GPa | 711 ksi | DIN 53452; ASTM D790 |
| Izod Impact, Notched | 0.735 J/cm | 1.38 ft-lb/in | DIN 53453; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 30.0 µm/m-°C @Temperature 20.0 °C |
16.7 µin/in-°F @Temperature 68.0 °F |
DIN 53752; ASTM D696 |
| Melting Point | 220 °C | 428 °F | DIN 53736; ASTM D789 |
| Deflection Temperature at 0.46 MPa (66 psi) | 205 °C | 401 °F | DIN 53461; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | DIN 53461; ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.6 @Frequency 1e+6 Hz |
3.6 @Frequency 1e+6 Hz |
ASTM D150/DIN 53483 |
| Dielectric Strength | 21.0 kV/mm | 533 kV/in | ASTM D149/DIN 53481 |
| Arc Resistance | 130 sec | 130 sec | ASTM D495 |
Users viewing this material also viewed the following:
- Nyco M400 WOLLASTOCOAT® Wollastonite
- SABIC Innovative Plastics Lexan® FXD144R PC (Europe-Africa-Middle East)
- Henkel Turco Aerowash XTR-1 Jet Cleaner, Exterior Wash
- Total HDPE HD 6221 High Density Polyethylene - Blow Molding
- Zircar Zirconia Buster M-15 Alumina Boards, Discs & Cylinders Insulation
- Zircar Zirconia YW-15 Yttria Woven Textile Insulation
- Polyplastics Duranex® 652SA Polybutylene Terephthalate (PBT), Low density, Low wear, Mineral filled
- A. Schulman POLYFORT™ FPP 1245 CaCO3 Filled Copolymer Polypropylene
- DuPont Performance Polymers Neoprene GNA M2 Polychloroprene Rubber (discontinued **)
- Chevron Phillips Dynex™ D508A7 Enhanced LLDPE Blown Film Resin (discontinued **)
Copyright © lookpolymers.com All Rights Reserved