Kinetics MIM 17-4PH Stainless Steel (H1100 Condition)

Category	Metal , Ferrous Metal , Stainless Steel , Precipitation Hardening Stainless
Manufacturer	Kinetics, Inc.
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Kinetics MIM 17-4PH Stainless Steel (H1100 Condition).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Precipitation-hardening stainless steel. Offers a good balance between corrosion resistance and strength. Magnetic. Hardenable to various strength levels and hardness by varying the aging heat treat temperature. Typically provides better corrosion resistance than the 400 series stainless steels, and better strength than the 300 series stainless steels. Often used for aircraft, dental, marine, medical, surgical, and applications where high levels of strength and hardness, and good corrosion resistance is required.Property values reported are typical for Kinetics' MIM products.Metal Injection Molding General Notes: Fine metal powders (generally

Physical Properties	Metric	English	Comments
Density	7.70 g/cc	0.278 lb/inÂ³	Sintered

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell C	34	34
Tensile Strength, Ultimate	1000 MPa	145000 psi
Tensile Strength, Yield	910 MPa	132000 psi
Elongation at Break	12 %	12 %	in 1 inch
Reduction of Area	33 %	33 %
Charpy Impact, Unnotched	140 J	103 ft-lb	1/2 size bar

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.070 %	<= 0.070 %
Chromium, Cr	15.5 - 17.5 %	15.5 - 17.5 %
Copper, Cu	3.0 - 5.0 %	3.0 - 5.0 %
Iron, Fe	70 - 78.4 %	70 - 78.4 %	by difference
Manganese, Mn	<= 1.0 %	<= 1.0 %
Nb + Ta	0.15 - 0.45 %	0.15 - 0.45 %
Nickel, Ni	3.0 - 5.0 %	3.0 - 5.0 %
Silicon, Si	<= 1.0 %	<= 1.0 %

Descriptive Properties	Value	Comments
Surface Finish	30 Ra

Users viewing this material also viewed the following: